playback not working properly

[carl micro]

i made a song in khpro then i thought i would try it out so i tried to playback in micro it played for about 25 secs then micro shutdown weird i thought i have been useing micro and khpro
for a couple of years now without many probs

this was happening before i installed a new vid card hence the new vid card old one was 8meg new one 64 mg nvidia geforce 4
agp im using xp pro micro 2315 khpro duron 1.3 gig /384 ram
ive tried the usual nocking back the hardware accelerator
to no avail please help

[Flipeoke]

Does this happen every time you play that particular song? Or does it happen with other songs too? If it is only with the one song, maybe it is currupt somehow. Are you using KHPro or KPro? If you have KPro reload your .kpr file, and export to cdg. Try playing again and see if this makes any difference? Or if that doesn't work (or you have KHPro), try tapping the lyrics again, and then export again. If it is happening on all songs, give us a little more info on what happens, any error messages, how microstudio shuts down, have you upgraded to the latest driver, have you installed anything else recently before it started happening (new hardware/software) etc...

[carl micro]

thanks for responding i have reloaded micro 2314 and khpro
2009 not really any problems when on with win 98 except that i had an 8mg graphics card that was definately dickie any way got xp pro on now with a new graphics card agp 64 mg nvidia geforce 4 direct x 9 384 mg ram 1300 duron 40 gig hd
plextor 16/10/40 ive just done another song in khpro no probs
until i try play back on pc if iplay song before i write cdg file it
plays almost all way through then locked up pc had to restart
it froze then i did it again this time i wrote the file before playing it save it no prob then tried to play it in microstudio it changed to full screen loaded up the words just about heard the music
then micro shut down completely as thugh id closed it down myself ive tried to lower hardware acceleration but to no avail
i seem to remember that this adapter card dosnt go down to 320x200 res i dont know if this is significant anyway i hope someone can help it drives me a bit crazy when you get faults like this especially when i know this program works perfect

[MTUSUPPORT]

Make sure that you have updated the Video drivers to the latest from NVIDIA. You can do this from:http://www.nvidia.com/view.asp?IO=winxp-2k_43.45

This should help.

[carl micro]

i have updated the video files at the adress given still having problems if i click play tab it will play for about 30 secs then micro shuts down if i make a song in khpro 4008 it will playback all
way through untill i export to cdg

[MTUSUPPORT]

Can you attach your Dxdiag to this post. Here is the link to how to do this: http://forum.mtu.com/showthread.php?threadid=322

[carl micro]

tried everything still no joy on playback. khpro i can playback full song if i have just made it no prob but once exported to cdg
will only play for about 30 secs if that

this is my dxdiag

[carl micro]

still having severe playback problems could someone help please
ive tried everything
yours hopefully carl

[mlepine]

Carl,

If I was you I would disable the DMA on both the hard drive and the cd-rom.
The fact that you've change to Windows XP, you now have the DMA enable by default wich wasn't the case with 98.

Start, Control Panel, System, Hardware, Device Manager, IDE ATA/ATAPI Controller, Primary & Secondary IDE Channel, Advance Settings, Transfer Mode.

Now change to PIO Only.

That is the solution for the broken letters and sticky letters for the Yamaha burners.
Who knows it might help you?

If it doesn't work just enable the DMA again

Good Luck