Microstudio Problem with Write Disc

[billyo]

Originally Posted by ASAYAS104

I got the tracklisting that I want to burn onto a CD and when I begin the write CD process the burning stops at 20%, 80% or none at all and gives me a error saying "Write Disc Aborted" Error and I didn't even do anything to it, very strange. This used to work and now it's suddenly stops on me. Anyone seen something like this? I'm running a Plextor PX 716A DVD R-W Drive. Thanks.

make sure you have the setting on your default drive as plextor read and write drive

[ASAYAS104]

Originally Posted by billyo

make sure you have the setting on your default drive as plextor read and write drive

Yes, the setting for read and write are well defined on the setting. anything else to do?
thanks

[billyo]

try switching the 2 drives...maybe one of them will be able to burn cdg's

[ASAYAS104]

I did that too. or even using one plextor burner.

[billyo]

i just went back to your first post, and i noticed that you are using a cdr-w..from what i read the recommendation was to use a cd-r, since most cd players are unable to play cdr-w. have you tried using a cd-r?

[ASAYAS104]

Just using cd-r. I have done this before ,it works sometimes ,the recordings before was accepted enough. but afther so many months not using it , it just doesn't work . as i have said goes up to 20% mostly recording then stopped and message error. after 50 tries switching to all was suggested to do. it went to 80% once . I clean the burner. upgrade firmware,switching read to write.

but i tried doing with my laptop and unable to produce a disent copy of a selected song cdg.

[billyo]

i have my plextor 716a for 4 years now and i never had a problem with it..i guessed my suggestion is maybe to get another drive..you can get almost any cd/dvd that can read cdg's now and they're cheap..i have a lightscribe and eomega slim design and they both read/write cdg's..