![]() |
|
Hoster Help Post Hoster questions, tips and suggestions here. |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Gwen this is exactly the same problem as what you had with the laptop. Regardless of which piece of equipment it is showing up in it is still a ground loop problem. Get a large enough Surge Protector extension cable, plug all your equipment into it and then use the Radio Shack or the other item listed in your other thread.
__________________
Dale Douglass 2nd Generation Karaoke I am not a member of the MTU Staff.
|
#2
|
|||
|
|||
Thanks a ton!
|
#3
|
||||
|
||||
also you shouldnt have your computer volume cranked all the way up.
i usually go a little above half.
__________________
The King of One Liners! Windows 10 Hoster 5.10 |
#4
|
|||
|
|||
I don't agree with you Beavis. I run my computer volume at full and my amp at about 80%. I control the output level through my mixer and equalizer (limiter built-in). If I ran my computer at 50% I would have a hard time picking it up and controlling it with the mixer.
__________________
Dale Douglass 2nd Generation Karaoke I am not a member of the MTU Staff.
|
#5
|
||||
|
||||
Quote:
![]()
__________________
|
#6
|
|||
|
|||
I bought one of these and all the audio equipment and the laptop get plugged into it:
http://www.guitarcenter.com/Furman-M...99-i1389441.gc I also bought one of these and it goes between the soundcard out on the laptop and the mixer: http://www.guitarcenter.com/Rolls-HE...47-i1124895.gc No hum- ever, now. |
#7
|
|||
|
|||
Quote:
I run my windows faderes one line below full volume on the "Volume Contorl" volume (or main volume) and on the "Wave" volume. This assures I get a good signal level with no internal distortion which can happen if the sound card is not up to snuff (low quality). My 2 cents. Jim ![]()
__________________
![]() http://madjim.com http://www.myspace.com/madjimhall http://www.youtube.com/madjimhall Test Comp #1: P4 3GHz * 3gb RAM * XP Home SP3 * IE8 * WMP11 * NF3.5 * Onboard Sound * Onboard Video * * * MTU Rack (Show Computer) * P4 3GHz * 3gb RAM* XP Home SP3 * IE7 * WMP11 * NF3.5 * Sound Blaster PCI-512 * ATI Raydeon 9200 |
#8
|
|||
|
|||
i do the same, have my laptop full volume, my boards fader is at unity gain, and the gain knob is at 12 o'clock and the channel fader is at around a line under the unity line, and my powered speakers is at 12 o'clock too..when i used to used my amp its at full volume..
__________________
BILLY O' WEEKEND.DJ Las Vegas, NV |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|