(5) Error reading Inquiry Data for devices.

[MTUSUPPORT]

Here is the Answer from the Programmer that we purchased our ASPI driver from:

Bryan,

That particular system vendor has a defective SCSI miniport driver loaded. Specifically, it rejects the IOCTL_SCSI_GET_INQUIRY_DATA command. I recall seeing this one time before, in a log file sent by you. That is the only time I have seen it, however. Bottom line is, I will not be able to provide you with a fix for this problem, because the fix lies outside of the things that I am able to fix. Was it NVIDIA? Whoever it was, their driver needs to handle the IOCTL mentioned above, or else the ASPI Manager software will not work.

Thanks,
Don

So the only way to fix this problem will be to wait for us to upgrade Micsrostudio to the new MMC code then it should work.

[horseshoe]

If this is after our one year free update, will you still honor it for us?

[Glen Conaway]

I tried the new Hoster demo and it works ok, I am able to use both my drives.

Also, I searched on Google for WnAspiNT (the title on the message box of the error i'm getting when I launch Microstudio), and I found some possible solutions.
This solution is found on a competitors fourm so I will not post the link:

1) remove any CD burning/authoring software (using the Windows
"Add/Remove" programs), including our program.

(note: After that's finished, go to "My Computer" / "C" / "Program
Files" and delete the entire ***********(Microstudio) folder (not just
its contents), making sure to move out any audio files that might be
stored in that folder first. Find and delete "cdrec.ini", "tour.ini",
"cdrec4.ini", "tour4.ini" and/or "machnm1.exe" (note: you MAY *[probably in our case]
not find some or all of these files).

2) Search your C drive for all of the following files. Delete any that
are found in ANY location:

(note: you may not find some or all of these files.)

winaspi.dll
wnaspi32.dll
aspi32.sys
wowpost.exe
wnaspint.dll
*aspi*.*

After this has been done, shut down your computer and restart it.

Rerun the Goldenhawk "aspight.exe" ASPI install program ONLY.

(found at: http://www.goldenhawk.com, in the "Download area".
Click on "Golden Hawk ASPI drivers for....".)

Reboot.

Then reinstall Microstudio software.
I haven't had time to try this but it may be worth a shot.

[MTUSUPPORT]

From what the Programmer had told me, is that your motherboard chipset driver is the one that needs to have the update.

This guy only works on ASPI drivers, this is all his company does, so he knows this inside out. He also is the one who wrote some for Goldenhawk.

So I would get the very latest drivers from your Manufacturers website for the Chipset driver on your motherboard.

Horeshoe,
As to the Upgrade, ADMIN will have to answer that one, as that next version, I think was going to be a pay upgrade for everyone. Not sure what he will do in that case.

[admin]

Originally Posted by horseshoe

If this is after our one year free update, will you still honor it for us?

We will grant everyone who is posted in this Thread and having problems with AMD processor/motherboards a free upgrade. When Microstudio 3.0 is released, contact sales@mtu.com, and reference this Thread and my Post number (upper right corner of my post). He'll get you a zero cost upgrade coupon.

[Glen Conaway]

I tried installing the latest Nvida nForce3 driver from Gigabyte and it didn't help , so I went to the Nvidia website and tryed their latest driver and it didn't help either.
I wonder if this is a Nvidia driver issue or a aspi driver issue, after all the error has WinAspNT in the title of the error message box.
I have no time now but I guess I will try installing the Goledenhawk driver next to see it it helps.

[horseshoe]

Thank you Admin. That is very generous and professional of you.

[Glen Conaway]

When will Microstudio 3.0 be released?
I am still unable to use Microstudio, and I guess I will be until version 3.0 is released.