Hoster 4.21 Vs. 4.22

[EmilioM]

Originally Posted by kod

During my Thursday night show (7/22) Hoster stopped four times between 8:15 pm and 9:30 pm and did not stop any more that night. The Bar is nicely air conditioned...

On Staurday night I did a private show (9:30pm to 1:30am) in a hot garage (95 degrees) and Hoster did not stop even once! It was very hot Saturday in North Carolina (99 before the sun set) and I was only using a the USB cooling fan mounted under my laptop.

This tells me I definitely don't have Laptop heat problem. And, if I "am" having a software problem, why didn't it stop any more Thursday and why didn't it stop at all under the very hot conditions Saturday night? (Rhetorical question, I guess)

Go figure...

Hey Kod, just wanted to put in my 2 cents, maybe it'll help. I've had problems with power at one of my venues, and what happens is Hoster freezes up when you hit play. The song stays on "cue". I have three power strips with lots of equipment plugged into all three. The power strips are all connected to each other with the last one in line plugging into the wall. What I did was isolate the power strip that my computer plugs into from the other power strips, and plug that into the wall by itself, and the 2 other strips are plugged into another outlet. That has cleared my freezing problem up. I found that power coming from the outlet must be on the low side, because just last week I put a visualization on the display that was very intricate and intense and it worked fine until I went to play, and it froze up again. I was able to take the visualization out after a few tries and replaced it with another one that wasn't as intricate and Hoster worked fine. That tells me that it's got to be power, especially since I had major problems with power before I moved to this side of the bar. The owner checked the outlet where I used to set up, and he said power was very low, so he rewired and fixed that outlet but where I moved to, they're still the same ones. One other thing I have found is if you press a button, and then press another one too quickly, it will freeze Hoster. Case in point. I have a singer that came up to sing and I gave him the mic. I started to play the song but he wasn't ready so I hit stop. That froze Hoster, and I had to restart Hoster and then it was fine. This has happened to me on a few occasions, and that also includes hitting an instabutton and then hitting another button. If this is what's happening to you, slow down on hitting the next button. Hopefully this helps.

JRMerc
Memories & More

[billyo]

that was one of my suggestions, there are 2 major causes of shutting down 1). either not enough power supply and 2). was over heating..if there is a way he could see the cpu temp, idle or running..

[EmilioM]

Originally Posted by billyo

that was one of my suggestions, there are 2 major causes of shutting down 1). either not enough power supply and 2). was over heating..if there is a way he could see the cpu temp, idle or running..

Billyo & Kod, I've found a program which is free that enables you to see temperature in Celsius or Farenheit for all your cores including the GPU. I think I got it at Cnet downloads. It's called EFMER TThottle. Download and install and it'll monitor temps while in idle or running programs. I've had it on to check while Hoster was running when I had the freezing problems.

JRMerc
Memories & More

[billyo]

Originally Posted by EmilioM

Billyo & Kod, I've found a program which is free that enables you to see temperature in Celsius or Farenheit for all your cores including the GPU. I think I got it at Cnet downloads. It's called EFMER TThottle. Download and install and it'll monitor temps while in idle or running programs. I've had it on to check while Hoster was running when I had the freezing problems.

JRMerc
Memories & More

that's good to know..i don't have any problems on hoster shutting down on me so far..Kod should download it to find out if thats causing his problem ( temp. wise )

[ddouglass]

Originally Posted by EmilioM

Hey Kod, just wanted to put in my 2 cents, maybe it'll help. I've had problems with power at one of my venues, and what happens is Hoster freezes up when you hit play. The song stays on "cue". I have three power strips with lots of equipment plugged into all three. The power strips are all connected to each other with the last one in line plugging into the wall. What I did was isolate the power strip that my computer plugs into from the other power strips, and plug that into the wall by itself, and the 2 other strips are plugged into another outlet. That has cleared my freezing problem up. I found that power coming from the outlet must be on the low side, because just last week I put a visualization on the display that was very intricate and intense and it worked fine until I went to play, and it froze up again. I was able to take the visualization out after a few tries and replaced it with another one that wasn't as intricate and Hoster worked fine. That tells me that it's got to be power, especially since I had major problems with power before I moved to this side of the bar. The owner checked the outlet where I used to set up, and he said power was very low, so he rewired and fixed that outlet but where I moved to, they're still the same ones. One other thing I have found is if you press a button, and then press another one too quickly, it will freeze Hoster. Case in point. I have a singer that came up to sing and I gave him the mic. I started to play the song but he wasn't ready so I hit stop. That froze Hoster, and I had to restart Hoster and then it was fine. This has happened to me on a few occasions, and that also includes hitting an instabutton and then hitting another button. If this is what's happening to you, slow down on hitting the next button. Hopefully this helps.

JRMerc
Memories & More

WHen you daisy chain power strips (connect one in to the next) then you are in effect lower each ones power output. You should never daisy chain them unless you are just using the string for distance from the plug and even that is a bad idea.
The visualization causing Hoster to freeze I don't believe would be a power problem but instead would be a processor capability problem.
Best thing to carry with you in your equipment would be a meter to check voltage levels and a ground checker to make sure outlet is grounded correctly. This would especially be helpful if you play in a lot of different venues. Then you can show the owner that he has a problem.

[EmilioM]

Originally Posted by ddouglass

WHen you daisy chain power strips (connect one in to the next) then you are in effect lower each ones power output. You should never daisy chain them unless you are just using the string for distance from the plug and even that is a bad idea.
The visualization causing Hoster to freeze I don't believe would be a power problem but instead would be a processor capability problem.
Best thing to carry with you in your equipment would be a meter to check voltage levels and a ground checker to make sure outlet is grounded correctly. This would especially be helpful if you play in a lot of different venues. Then you can show the owner that he has a problem.

Dale, I don't think it's a processor problem. I've got an Intel quad core 2.34 cpu and NVidia GeForce GT120 gpu. But I'll check to see how much that particular visualization is loading the cpu. There is one thing I've noticed about that visualization, and the problem that I used to have with the freezing of Hoster. When I'm at home, I can run Hoster with that visualization, and I have no freezes. Of course I have good power at home and I run through a UPS and 1 power strip. When I was having the frozen Hoster, it was only at that 1 venue. Once I separated the power strips, I had no more freezes until I ran that 1 particular visualization, which made me think it may be low power since this visualization is complicated and intense, and it might take a little more umph to get it to run. But like I said, at home I have no problems.

JRMerc
Memories & More

[kod]

I DO NOT suspect a HEAT PROBLEM! It ran well Saturday night under extreme heat conditions!

I DO NOT suspect a POWER PROBLEM. On Thursday's Show I run through a power conditioner! I run through a (single) Surge Protector connected to the power conditioner. I have done that from day one of moving to Hoster. I do not daisy chain protectors.

I only run a USB fan in one of my USB ports. Nothing else!

I keep my Wireless connection disabled unless I need to download something related to Hoster.

Dale,
I went to Black Viper and you need to be a Computer Geek to understand and follow their instructions. Although I am pretty Computer literate, this is well above my head.

Although I love Hoster and don't want to, I'm beginning to wonder if I should look elsewhere for another program. I just can't believe I'm the only one having problems (out of the people using Hoster with Win7). I tend to believe I'm the only one reporting it. Perhaps others are just living with it...

Maybe the problems I'm having are only happening with those using Windows 7! Maybe those numbers (Win7) are very small!

I just don't know, but it's getting very frustrating...

[Skybird74]

I am still having problems with Hoster freezing & shutting down when BA is running, even without Visualizations. It seemed to go away with 4.22 as long as I let BA run completely automatic & not manually stop or start songs. I reported that I used BA in that manner. It was also reported that BA would freeze after repeatly pressing the "next" (right arrow) button. 4.22 did address both of these problems, as this was discussed in the Beta Forum.

4.22 seemed to fix this for me at first ........but this problem has returned & now when a song is playing in BA, and I hit "stop", the song will not stop. When I "X" out of BA, the song continues to play. The song playing in BA will not stop until I "X" out of Hoster. Once that happens, I have repeated crashes.

KOD, you're not the only one having problems with BA. I am running Vista. No one has suggested cleaning the Registry, so I'm going to try that next.

[kod]

Skybird74,

My problem does not seem to be related to BA. I shut BA down before I start my show and have not had any problems starting and stopping it.

My problem is not Hoster freezing. My problem is Hoster stopping between songs. I can close Hoster and start it again with no problems and my playlist in tact, so it's really just a frustrating problem more than anything else.

Most of the time the audience nevers knows anything has happened, because thank goodness, it's always happens between songs...

[ddouglass]

Originally Posted by kod

I DO NOT suspect a HEAT PROBLEM! It ran well Saturday night under extreme heat conditions!

I DO NOT suspect a POWER PROBLEM. On Thursday's Show I run through a power conditioner! I run through a (single) Surge Protector connected to the power conditioner. I have done that from day one of moving to Hoster. I do not daisy chain protectors.

I only run a USB fan in one of my USB ports. Nothing else!

I keep my Wireless connection disabled unless I need to download something related to Hoster.

Dale,
I went to Black Viper and you need to be a Computer Geek to understand and follow their instructions. Although I am pretty Computer literate, this is well above my head.

Although I love Hoster and don't want to, I'm beginning to wonder if I should look elsewhere for another program. I just can't believe I'm the only one having problems (out of the people using Hoster with Win7). I tend to believe I'm the only one reporting it. Perhaps others are just living with it...

Maybe the problems I'm having are only happening with those using Windows 7! Maybe those numbers (Win7) are very small!

I just don't know, but it's getting very frustrating...

What I was referring to was there were several of you using Windows 7, who had initially reported this problem. After several fixes, of that group you are the only one still not working.
One thing that Skybird said brought to mind that when MTU came out with the BA and Visualizations, it was stated that some computers would not be able to handle this because both use a lot of memory, video memory and processor time. Have you tried running any shows without using the BA and visualizations at all? Laptops being the worst case because they use shared memory for video.

What do you use for a power conditioner?

[Skybird74]

Well, KOD already said his problem has nothing to do with BA.

My problems started with BA, but were only with visualizations running. Otherwise, I could always run it in the background and/or start & stop songs manually. I didn't start having these new problems until after 4.21 & now with 4.22. As I mentioned above, when I leave BA play a few songs for a BREAK when I only have a few singers, if I his STOP, then the song keeps playing. It even continues playing after I "X" out of BA, and the song will NOT stop playing until I "X" out of Hoster. I don't see how this could all of a sudden be a "computer problem"

I am using the same computer, added a GIG of RAM & did all Microsoft Updates before upgrading Hoster from 4.21 to 4.22. However, I went from .NET 2.0 to 3.5. It was only after this update that I now have to BA problems with Songs that won't even STOP.

In just "looking" at my computer, I looked at Services Running & discovered that - next to .NET, it says "Stopped" instead of "Running". I don't know why or how to change it or even if I should. I have to think that this happened when I did the update.

[ddouglass]

Originally Posted by Skybird74

Well, KOD already said his problem has nothing to do with BA.

My problems started with BA, but were only with visualizations running. Otherwise, I could always run it in the background and/or start & stop songs manually. I didn't start having these new problems until after 4.21 & now with 4.22. As I mentioned above, when I leave BA play a few songs for a BREAK when I only have a few singers, if I his STOP, then the song keeps playing. It even continues playing after I "X" out of BA, and the song will NOT stop playing until I "X" out of Hoster. I don't see how this could all of a sudden be a "computer problem"

I am using the same computer, added a GIG of RAM & did all Microsoft Updates before upgrading Hoster from 4.21 to 4.22. However, I went from .NET 2.0 to 3.5. It was only after this update that I now have to BA problems with Songs that won't even STOP.

In just "looking" at my computer, I looked at Services Running & discovered that - next to .NET, it says "Stopped" instead of "Running". I don't know why or how to change it or even if I should. I have to think that this happened when I did the update.

Are you hitting the STOP in the BA window or on the Hoster main screen?
Closing the BA window doesn't stop the BA song playing. It just closes the window off of the screen.
The .Net service only runs when it is needed. It is not needed for running Hoster. It is used when installing Hoster. That is why it is needed as far as Hoster goes.

Kod does use the BA if only before his shows he is still turning it on.

[Skybird74]

Originally Posted by ddouglass

Are you hitting the STOP in the BA window or on the Hoster main screen? How can you stop a song that is playing in BA by hitting anything other than Stop in BA What other button are you talking about? Is there more than 1 way to Stop a song?
Closing the BA window doesn't stop the BA song playing. It just closes the window off of the screen. That sounds strange. If BA is a "program" & you "X"out or "Close" it, why would it still be running?
The .Net service only runs when it is needed. It is not needed for running Hoster. It is used when installing Hoster. That is why it is needed as far as Hoster goes. Thanks. I always wondered what it was for.

Kod does use the BA if only before his shows he is still turning it on.

True, but if he turns it OFF before his Shows & still has shutdowns during the Show, how can this be caused by BA