Hissing Problem

[MackieRocks]

I have a Dell Laptop connected to a Mackie board and Mackie speakers. I have a huge hissing problem coming out of one of my speakers. I have the speakers daisy-chained and plugged into the right channel on the board. Any ideas?

[Beavis]

your problem is in the ground.

put a 3 to 2 plug adapter on the amp. you need to eliminate the third prong on the mackie amp power cord.

[crazchef]

<>I use Mackie 1521 speakers with a Mackie DFX-6 board. I also use SRM 450 for smaller venues or as a monitor for singers. I had the same problem with the hissing sound. The solution I came up with was to purchase the Sound Blaster Extigy external sound card and connect my laptop to the extigy. Then I purchased a cable with a mini plug on one end and a left and right ¼” plug on the other end. Then I connected the cables from the Extigy (mini plug) to the Mackie board (1/4” left and right). I then connect my Mackies to the board. I recommend connecting the Mackie speakers to the left and right channels as opposed to daisy chaining the speakers. The sound is excellent.


(Mackies do rock!!!!)

[Eric Whitehouse]

I have a Dell Inspiron 8500 laptop and cured the problem by putting a three to two adaptor plug at the end of the laptop power cord. This resolved the problem immediately. Good luck.

[Beavis]

thats what i just said !

[Eric Whitehouse]

No you said, you need to eliminate the third prong on the mackie amp power cord. I said eliminate the earth on the laptop, it does make a difference. Lets not argue I was only trying to help.