Tried to Upgrade Hosterv4.10

[bendrew]

I did upgraded HosterV4.06a to v4.10 and installation went through and will reboot the computer. Then i open Hoster and the dreaded crash message appear so i tried some other ways to install it, uninstall, upgrade and nothing is working. So, installed back v4.06a and this time is the registration issue comes up so i cannot continue. i send a ticket to reset my registration already and i hope will be fix next week. The reason why i got stuck with v4.06a is this crashing problem. It always showed that message "encountered an error". Then this registration reset.. My computer is windows updated and like i said Hoster v4.06a is working before the upgrade. This is my comp info...

OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
System Name BEN-XP
System Manufacturer INTELR
System Model AWRDACPI
System Type X86-based PC
Processor x86 Family 15 Model 3 Stepping 4 GenuineIntel ~3200 Mhz
BIOS Version/Date Phoenix Technologies, LTD 6.00 PG, 5/31/2005
SMBIOS Version 2.3
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name BEN-XP\user
Time Zone Pacific Daylight Time
Total Physical Memory 1,024.00 MB
Available Physical Memory 516.16 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB
Page File Space 2.39 GB
Page File C:\pagefile.sys

[ddouglass]

Originally Posted by bendrew

I did upgraded HosterV4.06a to v4.10 and installation went through and will reboot the computer. Then i open Hoster and the dreaded crash message appear so i tried some other ways to install it, uninstall, upgrade and nothing is working. So, installed back v4.06a and this time is the registration issue comes up so i cannot continue. i send a ticket to reset my registration already and i hope will be fix next week. The reason why i got stuck with v4.06a is this crashing problem. It always showed that message "encountered an error". Then this registration reset.. My computer is windows updated and like i said Hoster v4.06a is working before the upgrade.

Are you saying every version since 4.06a has crashed?

[bendrew]

To make it clear : I rebuilt this computer for the sole purpose of using Hoster.
I use this Hoster v4.06a just for editing, importing and testing songs and when everything is done right, I updated my show computer. So, before the crash, I'm using HOSTER VERSION 4.06A and stuck with this version 'cause i cannot upgrade to v4.09 or 4.09d cause of crashing. Take Note: Version 4.06a is fine except that i cannot install it now no more because of registration issue which MTU can handle. (My show computer is using HOSTER VER 4.09d and so far so good.) Now that version 4.10 is here, I upgraded with fear that i might have a problem and that fear happens. There are some programs in this computer which is related to music and videos and i don't have this unique kind of problem. Everytime I do the upgrade, I always end up like this. Like what i said before in my other topic, this upgrade thing is a HIT AND MISS.
So, for the meantime, I'm not interested in upgrading to V4.10, I just want to install vers 4.06a or any version that is working. So, pls take care of my registration problem before i move on. Version 4.10 has a lot of promising features that i need but I have to live with this situation right now. ALLOW ME TO INSTALL VER4.06A BEFORE I DO THE NEXT THING. Thanks anyway..

[ddouglass]

Since you have submitted a ticket I am sure they will get it reset next week.
The strange thing is no one else was having crash problems with 4.09. It was very stable, which makes me think something is not right on your computer.
Here is a link that may help: http://www.iobit.com/ there is an Advanced System Care free edition that can clean up your computer's registry and other things. This could clear up a lot of problems that may be causing it to crash.
Have you done the Custom Updates from Microsoft lately. Auto updating does not get all the updates as it only loads those deemed by Microsoft to be critical security updates.
I would do the custom updates first then run the System Care.
After you do those things you should be able to upgrade to at least 4.09d if you still have the installer for it. There is a bug or so it seems to be in 4.10 if you are running without the display always on. MTU has been made aware and will work on that next week.

[bendrew]

I did all the windows updates auto and custom and install the Advance system care software to clean up this computer and i'll just wait for the registration enable to install Hoster. There's nothing i can do right now. I look at my default registry and it seems to be clean. Also, , question, since my computer is clean, can i install version 4.10 straight or I have to install the older version first before V4.10 ?? I don't wanna do upgrade my show computer (v4.09d) to v4.10 unless this computer is done. So, I might have to take a break and I'll let you know what happen next week......

[ddouglass]

As long as you have had 4.06 installed on it you should be able to load it without a problem (registration wise) after they reset it. I say should but you may have to install 4.06 first then upgrade. Try it and see after they reset it.

[muzicman144]

Originally Posted by ddouglass

Are you saying every version since 4.06a has crashed?

Dale, I, too, have encountered this problem. I upgraded to 4.10, it runs a few minuted then, error encountered a problem and shut down. I removed Hoster completely, re-installed and same problem. I thought i had all updates installed, will check it out, will run the program you suggested. First Hoster problem i have ever encountered since days of 2. that wasn't caused by me. The answer here will probably lie with me also. Will let you know.
muzicman144

[ddouglass]

Originally Posted by muzicman144

Dale, I, too, have encountered this problem. I upgraded to 4.10, it runs a few minuted then, error encountered a problem and shut down. I removed Hoster completely, re-installed and same problem. I thought i had all updates installed, will check it out, will run the program you suggested. First Hoster problem i have ever encountered since days of 2. that wasn't caused by me. The answer here will probably lie with me also. Will let you know.
muzicman144

Check the Help/About Hoster for the version. If it isn't "4.10." then re-download and install again. This may not help but it does fix another bug.
Also make sure that the Show Display is set to be always on. There was a bug in having it turned off and that fix hasn't been released yet.

[bendrew]

(After you have removed/installed the software every 100 times it disables it. You then have to contact us to allow us to re-enable it. Yours just hit 200 installs. Why have you had to have this many installs, as this is a limit that no other customer has hit, unless it was a beta tester?)
This is what MTU support reply to me, But i already send a follow up. Unluckily, I'm still waiting for a solutions to my problem. It says that i hit 200 install wherein if i recalled, upgrading, uninstall, installed or other ways to make it work is probably 5 or 6 times. I have no idea about what happen to 200 hits.This computer like I said is only for Hoster, Microstudio, and Songverter editing and testing. So, I need some recommendations of what I should do next.

[ddouglass]

Are you sure they didn't reset it at the same time? Have you tried to install since getting that?

[muzicman144]

[Submitted twice