MTU.Community


Go Back   MTU.Community > Hoster Software > Hoster Help

Hoster Help Post Hoster questions, tips and suggestions here.

Reply
 
Thread Tools Display Modes
  #1  
Old January 1st, 2009, 07:13 PM
Judy Andrews Judy Andrews is offline
Registered User
 
Join Date: Dec 2008
Posts: 8
display on TV

I just bought hoster lite 4.06. I have it loaded on a HP pc with vista home os. My video card is NVida Geforce6150SEnForce430. I need to know how to get the display on the tv. It comes up on the monitor instead. I have done everything in the troubleshooting and haven't fixed it. When i right click on the desktop per instruction only one monitor shows up. Do I need a different video card and if so which one. Thank you
Judy
Reply With Quote
  #2  
Old January 1st, 2009, 07:35 PM
billyo billyo is offline
Registered User
 
Join Date: Jan 2005
Location: Las Vegas, NV
Posts: 2,202
Quote:
Originally Posted by Judy Andrews View Post
I just bought hoster lite 4.06. I have it loaded on a HP pc with vista home os. My video card is NVida Geforce6150SEnForce430. I need to know how to get the display on the tv. It comes up on the monitor instead. I have done everything in the troubleshooting and haven't fixed it. When i right click on the desktop per instruction only one monitor shows up. Do I need a different video card and if so which one. Thank you
Judy

is your pc capable of dual display ? make sure the tv is on prior to powering up your pc, click on control panel, then click on appearance and themes, click on display, then settings, click on #2 monitor then click on extend.. then apply /ok ,once you did all these steps, open hoster drag the singers display to the tv, make sure you drag the singers screen to the tv,and resize your viewer screen first before you play a song.

note : have you done all the necessary changes on vista prior to installing hoster ?, and also make sure you do all the custom updates, if not hoster wont run right.
__________________
BILLY O' WEEKEND.DJ
Las Vegas, NV

Last edited by billyo; January 1st, 2009 at 07:44 PM.
Reply With Quote
  #3  
Old January 1st, 2009, 07:42 PM
ddouglass ddouglass is offline
Super Moderator
 
Join Date: Nov 2004
Location: Ace, TX (5 miles past Nowhere)
Posts: 9,395
Quote:
Originally Posted by Judy Andrews View Post
I just bought hoster lite 4.06. I have it loaded on a HP pc with vista home os. My video card is NVida Geforce6150SEnForce430. I need to know how to get the display on the tv. It comes up on the monitor instead. I have done everything in the troubleshooting and haven't fixed it. When i right click on the desktop per instruction only one monitor shows up. Do I need a different video card and if so which one. Thank you
Judy
There should be a Nvidia software installed on your computer. Open it and set the monitor settings so it can see the 2nd monitor. This is overriding the Windows Display control.
Also, you need to follow the instructions on this page http://www.mtu.com/upgrades/hoster/v...de-hoster4.htm to set up your computer for correct operation of the program.
__________________
Dale Douglass
2nd Generation Karaoke
I am not a member of the MTU Staff.
Reply With Quote
  #4  
Old January 1st, 2009, 07:47 PM
billyo billyo is offline
Registered User
 
Join Date: Jan 2005
Location: Las Vegas, NV
Posts: 2,202
Dale..Congratulatons !!! sorry i just noticed it , cant pick a better person....again Congratulatons.
__________________
BILLY O' WEEKEND.DJ
Las Vegas, NV
Reply With Quote
  #5  
Old January 1st, 2009, 09:43 PM
bobcox- with the Lord bobcox- with the Lord is offline
Frequent Member
 
Join Date: Aug 2003
Location: PA
Posts: 1,227
also go to nvidia website and download newest drivers.
__________________
Test Machine #1
Windows XP-PRO SP3
Dell 4700c P4 3.2 GHz
2 Gigs pc2-ddr 4200 Ram
seagate 320 Gig SATA Hard Drive
107 Gigs free
Internal Sound Card
NEC 6650a Internal DVD/RW Slimeline
Jaton Nvidia 8400GS-Ex 512 Megs Ram On Board
All windows Updates
Reply With Quote
  #6  
Old January 5th, 2009, 08:27 PM
Judy Andrews Judy Andrews is offline
Registered User
 
Join Date: Dec 2008
Posts: 8
dual display

Well, I found out my video card is input only so I have to get a new card. I have found a EVGE GeForce7200gs 128mb DDRZ 512mb w/turbocache DVI VGA TV out at Tigerdirect. Can anyone tell me if this will work with hoster?
Thank You.
Judy.
Reply With Quote
  #7  
Old January 5th, 2009, 09:23 PM
ddouglass ddouglass is offline
Super Moderator
 
Join Date: Nov 2004
Location: Ace, TX (5 miles past Nowhere)
Posts: 9,395
Judy this card should work, but one with 256MB or 512MB (the first number) would be better. Future upgrades of Hoster are requiring more video memory than the current ones. Be sure that it has an RCA or S-Video plug along with the VGA plug on the back, so you can use a TV as secondary monitor.
I should have researched this better on your initial post. The only way you could use the original video would be to use two computer monitors (1 analog and digital with DVI input). A TV will not work with the on-board video.
You may have to go into the Bios and disable the on-board video after you put the new card in and get it set-up.
__________________
Dale Douglass
2nd Generation Karaoke
I am not a member of the MTU Staff.
Reply With Quote
  #8  
Old January 5th, 2009, 09:55 PM
Rockin D Rockin D is offline
Registered User
 
Join Date: Sep 2008
Location: Texas
Posts: 6
Help getting your monitor up

Hi, I too am a vista user and trust me this is a little more trouble than it's worth but try this. Right click on the blank part of your screen and then a window will appear go to personalize and another window will appear then at the bottom it will say display and settings double left click and the next window that comes up will have the number 1 and the number 2 in boxes. Click once on the number 2 and this will be your monitor make sure the color is set at 16bit and that your resolution is above 800 make sure you check the box that says extend the desktop onto this monitor click apply and ok.
Reply With Quote
  #9  
Old January 5th, 2009, 11:14 PM
ddouglass ddouglass is offline
Super Moderator
 
Join Date: Nov 2004
Location: Ace, TX (5 miles past Nowhere)
Posts: 9,395
Rockin D her problem isn't getting it set-up. It is that her on-board video card does not have any outputs other than the computer monitor output.
__________________
Dale Douglass
2nd Generation Karaoke
I am not a member of the MTU Staff.
Reply With Quote
  #10  
Old January 6th, 2009, 09:29 AM
Judy Andrews Judy Andrews is offline
Registered User
 
Join Date: Dec 2008
Posts: 8
dual display

Thank you Dale. How about the EVGA Force9500GT?
Judy
Reply With Quote
  #11  
Old January 6th, 2009, 11:42 AM
ddouglass ddouglass is offline
Super Moderator
 
Join Date: Nov 2004
Location: Ace, TX (5 miles past Nowhere)
Posts: 9,395
Looks to me to be the ticket. It does have 512MB of memory and should do the trick.
__________________
Dale Douglass
2nd Generation Karaoke
I am not a member of the MTU Staff.
Reply With Quote
  #12  
Old January 6th, 2009, 12:44 PM
JNS02 JNS02 is offline
Registered User
 
Join Date: Feb 2004
Location: Hastings, Michigan
Posts: 153
Quote:
Originally Posted by bobcox View Post
also go to nvidia website and download newest drivers.
Be careful when updating driver, I have a nvidia GForce 8600 GT and after updating driver it would only allow me to use HD TV's. I had to roll back driver as all places I do shows don't have HD TV's.
__________________
Show Computer (Custom Built)
OS Windows XP SP3
Processor 2.7GHz single core
Motherboard with 6 channel Audio
2GB RAM
250GB AV hard drive
256MB Video Card with S-video and dual display
DVD-ROM Drive
430watt power supply
Rack mountable case

Last edited by JNS02; January 6th, 2009 at 12:46 PM. Reason: Spelling
Reply With Quote
  #13  
Old January 6th, 2009, 03:52 PM
Beavis's Avatar
Beavis Beavis is offline
VIP
 
Join Date: Sep 2002
Location: Berkshires
Posts: 2,759
Quote:
Originally Posted by JNS02 View Post
Be careful when updating driver, I have a nvidia GForce 8600 GT and after updating driver it would only allow me to use HD TV's. I had to roll back driver as all places I do shows don't have HD TV's.
did you update through windows or nvidia ?
__________________
The King of One Liners!

Windows 10

Hoster 5.10
Reply With Quote
  #14  
Old January 9th, 2009, 02:05 PM
JNS02 JNS02 is offline
Registered User
 
Join Date: Feb 2004
Location: Hastings, Michigan
Posts: 153
Beavis I have updated both ways, Windows and NVidia. Same results.
__________________
Show Computer (Custom Built)
OS Windows XP SP3
Processor 2.7GHz single core
Motherboard with 6 channel Audio
2GB RAM
250GB AV hard drive
256MB Video Card with S-video and dual display
DVD-ROM Drive
430watt power supply
Rack mountable case
Reply With Quote
  #15  
Old January 27th, 2009, 10:01 AM
Judy Andrews Judy Andrews is offline
Registered User
 
Join Date: Dec 2008
Posts: 8
dual display

OK guys I got a Gforce8400 video card. I changed the settings to "extend the desktop onto this monitor", clicked apply and ok. I restart the computer. The display starts on the TV, not my main monitor, then when it gets to login & password it reverts back to the main monitor. I open Hoster and the second display is still on the main. I cannot get it on to the TV. I go back to display settings and the #2 monitor says "inactive. I'm lost. What do need to do now?








g
Reply With Quote
  #16  
Old January 27th, 2009, 10:13 AM
Beavis's Avatar
Beavis Beavis is offline
VIP
 
Join Date: Sep 2002
Location: Berkshires
Posts: 2,759
the second needs to be set to active.
__________________
The King of One Liners!

Windows 10

Hoster 5.10
Reply With Quote
  #17  
Old January 27th, 2009, 11:02 AM
Judy Andrews Judy Andrews is offline
Registered User
 
Join Date: Dec 2008
Posts: 8
dual display

How do I set it to active. I have left clicked on it, double left clicked on it and right clicked on it and find nothing to activated it. I went to the Nvida control panel where you can set dual displays. When it is on single display my monitor and TV show up but when I change it to clone the TV does not show. I forced it and restarted but still the same. Any suggestions?
Reply With Quote
  #18  
Old January 27th, 2009, 11:04 AM
Beavis's Avatar
Beavis Beavis is offline
VIP
 
Join Date: Sep 2002
Location: Berkshires
Posts: 2,759
right mouse click on your desktop and select properties, make sure you do not have the mouse on an icon. on the tab that says settings click it. it should be right there Extend your desktop.
__________________
The King of One Liners!

Windows 10

Hoster 5.10
Reply With Quote
  #19  
Old January 27th, 2009, 11:57 AM
Judy Andrews Judy Andrews is offline
Registered User
 
Join Date: Dec 2008
Posts: 8
dual display

I have vista home premium. It doesen't have properties just personalize which takes me to rhe screens I told you about.
Reply With Quote
  #20  
Old January 27th, 2009, 12:01 PM
Beavis's Avatar
Beavis Beavis is offline
VIP
 
Join Date: Sep 2002
Location: Berkshires
Posts: 2,759
im not up on vista.
__________________
The King of One Liners!

Windows 10

Hoster 5.10
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -4. The time now is 11:12 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2009 - 2025, Jelsoft Enterprises Ltd.
The contents of this forum are copyrighted by Micro Technology Unlimited, 2000-2008. Use of any material from these Forums is prohibited without written agreement from MTU.