MTU.Community

MTU.Community (http://forum.mtu.com/index.php)
-   Microstudio Help (http://forum.mtu.com/forumdisplay.php?f=6)
-   -   Upgrade Won't Recognize CDG Drive (http://forum.mtu.com/showthread.php?t=3567)

Kimimo7 March 11th, 2004 12:22 AM

Upgrade Won't Recognize CDG Drive
 
I just upgraded from Microstudio 2.315 to 2.517, and now none of my drives are detected. I have a Plextor 40/12/40A that I bought when I purchased 2.315. HELP!!!

Thanks

George March 11th, 2004 10:03 AM

If you don't already have it, try downloading DirectX 9.0b from this link.

http://www.microsoft.com/downloads/d...displaylang=en

George

Kimimo7 March 11th, 2004 02:37 PM

Thanks George, but I already have that direct X. Any other suggestions?? Everything worked fine untill I installed the upgrade. In fact, all I really wanted to upgrade was my Keyrite to the 2.008 version but I thought I might as well upgrade Microstuio too. I hope it wasn't a mistake?? I'm still waiting for someone at MTU to contact me.

George March 11th, 2004 03:00 PM

Try clicking on DRIVES, then ASPI DRIVERS, and make certain it's on MTU INSTALLED DRIVER.

Microstusdio 2.517 has it's own driver built in, and should work..
If you change the driver from DEFAULT, to the MTU one, don't forget to exit the program for it to take effect. I think I'd re-boot.

If it's already on that one, try changing and see of that helps.

George

MTUSUPPORT March 11th, 2004 04:09 PM

As George stated, the ASPI drivers most likely are the problem. Please reboot the computer also and see if that will fix the problem.

You can download the latest ASPI drivers from: http://mtu.com/kb/index.php?page=index_v2&id=23&c=1


All times are GMT -4. The time now is 04:12 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2009 - 2025, Jelsoft Enterprises Ltd.
The contents of this forum are copyrighted by Micro Technology Unlimited, 2000-2008. Use of any material from these Forums is prohibited without written agreement from MTU.