Breakaway SW doesn't work with 5.06
 

I'm having a problem with my background now. I have it on a 3 second fade and it studders while closing, Anyone else have this problem? I've been using Breakaway the last couple weeks which has auto audio gain controls, love it. Anyway it was fine until this update...

Re: Hoster 5.06 Bug Reports
 

John

What is "Breakaway"?

Has everyone re checked their operating system settings as recommended by MTU prior to completing the upgrade?

Re: Hoster 5.06 Bug Reports
 

Did you follow the instructions regarding setting your Power Management set to "Max Application Performance"
Also in the Tools menu - Audio Controls command dialog a new "Audio Dropouts..." control should be defaulted to 10. Setting it higher may help.

Regarding your Breakaway software I can only say see what happens if you dissable it. I did try it myself but it does try and overide Hoster settings.

Re: Hoster 5.06 Bug Reports
 

Roy I uninstalled 5.06 and went back to my 5.05 and don't have any problems. This is the site for Breakaway. http://www.claessonedwards.com/index...d=46&Itemid=59
It's great little progam. It has a free 30 trial period, see if you have any problems with it and 5.06.

Re: Hoster 5.06 Bug Reports
 

There is one warning Roy, if you download this, plan on paying 29.95 for it later. Theres no going back afterwards, it's that sweet...

Re: Hoster 5.06 Bug Reports
 

I tried it some weeks ago, don't want it, found it caused a few hick ups because it tries to adjust it's own volume and affected fades and messes with settings when you set different volume settings for different things like instabuttons and background audio.
I can get all the Audio affects through my mixer without adding to processing power that a software based system uses.

Re: Hoster 5.06 Bug Reports
 

That's what the "range" on Breakaway is for. If you set it at 40, and your Hoster background at 20 then your background audio is at 60%. I have no problems with the 5.05. Did you try it with 5.06, if so then there's the problem I'm talking about, the hickups...

Re: Hoster 5.06 Bug Reports
 

Johnpyle
This thread is really for 5.06 bugs reporting. Don't really want to fill it up with discussion on other software.
I notice you don't have your private messaging enabled other wise I would discuss this through that.

Re: Hoster 5.06 Bug Reports
 

Thats just it. My Breakaway doesn't work correctly with 5.06 and does with 5.05. So to me it's a bug...

Re: Hoster 5.06 Bug Reports
 

aznetbear,

From what I've been reading in this thread it appears that Breakaway is actually the culprit for BA Player not working on your machine. (see Roy Dennis earlier post in this thread)

Breakaway doesn't seem compatible with all the new changes made to operate Hoster with "Tempo Change".

Just my thoughts.

Re: Hoster 5.06 Bug Reports
 

Let me help you understand. For decades MTU has provided software tools that work. From time to time, there are other programs that come on the scene and do this or that, which interfere with some MTU programs. Roxio was the worst as it make the optical drive inaccessible to any other program.

In 5.05, we added Tempo control, which took months of time to get the kinks out to work with Windows correctly. That is probably the explanation why Breakaway works with 5.05 and not 5.06.

I consider what you are reporting to be an incompatibility between Hoster and Breakaway... NOT a bug in Hoster.

Test 5.06 for a while, going through all the changes we list in the "Versions" topic. You can find the link at the top of the left navigation column in the manual, which you can run from Hoster's menu bar "Hoster Manual" command.

Simply put, if you don't want the new features in Hoster 5.06, then run 5.05.

We are not going to address this incompatibility this year, if ever. I am moving all these topics to a new Thread called "Breakaway SW doesn't run with 5.06" so others can see it, and to clear this "bug report" thread. Then, if others post they also run Breakaway, we will consider it. However, with our addition of Tempo, I doubt seriously if there is anything we can do to let other programs change the audio after we have Tempo/Key/Fade changed it.

Re: Breakaway SW doesn't work with 5.06
 

The posts are now moved to this thread.

Re: Breakaway SW doesn't work with 5.06
 

That will be OK, just keep it on your list please... We have our Hoster running great on 5.05. The Breakaway is so helpfull at our gigs, mainly the leveling of outputs. No more tracks you have to raise, only to have them blair out on the next song. Sandra was terriable at that and I always had to be near by on song changes...

Re: Breakaway SW doesn't work with 5.06
 

So what you want is a "Automatic Gain Control" (AGC) in Hoster? :?

We have considered that, and would be more willing to add that in than try to modify to work with some other code we have no control over.

Re: Breakaway SW doesn't work with 5.06
 

AGC would be "Sweet"!

I also run into some of the same challanges of keeping the volume level just right! The volume level for Videos are well below that of KMA (CD+G, MP3+G) or KMH files. This requires close attention when swithching from Video to KMA/KMH otherwise the potential to make ears ring is there.

Should a post be made in Hoster new features request?

Re: Breakaway SW doesn't work with 5.06
 

I think a discussion of audio normalization (AGC) has been on the table for a while now, I remember participating in the thread, and it was tabled for future consideration... so you would just be bumping the thread, or AGC conversation to freshen the discussion to current plans of MTU, and if, and how much interest the current clients and / or future buyers would have in this feature... then perhaps, MTU would put it on the feasibility schedule, and have engineering look at it! And judge the cost to benefit ratio!:w

I still vote YES to have an audio normalization feature built into Hoster, instead of having to add another program, ie. BreakAway, that may or may not work with the Hoster Programming Code... at least that way, we can keep it compatible as Hoster evolves...:w

Re: Breakaway SW doesn't work with 5.06
 

Auto gain control WITH multiband compressor - but it would have to be user adjustable like Breakaway (which I use now as well). The multiband is the key to why BreakAway sounds so good. It takes certain frequencies which are recorded too hot & only pulls them down automatically on the fly taking a somewhate bad recording and bringing it back to a decenet/tolerable sounding state - crispens up the over mix & adds a little punch to the low end as well.
Like in the OTSDJ, they have a killer multi band/AGC control as well. If Hoster could add this, that would be sweet, not to affect/change the actual files, but an inline plugin doing it in real time.

Re: Breakaway SW doesn't work with 5.06
 

Nice idea :) My DJ program has one "autogain"..but it is not 100% flawless, however, it also has an "auto-remember" feature so when you adjust the gain on the fly it remembers that and makes that correction for the future playing of that particular song (this is used for those odd songs that even with the auto-gain on , they still don't seem to balance out well).

Re: Breakaway SW doesn't work with 5.06
 

Lonnie are you having any problems with Breakaway and 5.06? The only problem I have is when the background fades out, it glitches bad...BTW I second what Lonnie said, It also would be a great selling point.

Re: Breakaway SW doesn't work with 5.06
 

Actually my show machine is having problems with 5.06 in general, i'm going to reinstall tonight if I can get internet and try it again.