MTU.Community


Go Back   MTU.Community > Vogone & Vogone Easy Software > Vogone Help

Vogone Help Post Vogone questions, tips and suggestions here.

Closed Thread
 
Thread Tools Display Modes
  #1  
Old July 24th, 2001, 02:08 AM
admin admin is offline
Administrator
 
Join Date: Oct 2000
Location: Raleigh, NC, USA
Posts: 10,515
Thumbs up V2.008 - Post your comments here

This is almost the final Production Release... we hope. We will try to get the Stop button to rename back to the Play title faster, but Windows is giving us grief for now.

If you don't find any problems, the basic code is a go and the next release will be for your final approval for Production Release.

Please post here as soon as you download and run this version, and tell us if you find any problems.

Thanks to all of you who have been testing Vogone with us. Your help has been invaluable in bringing Vogone to this stage.
  #2  
Old July 24th, 2001, 03:48 AM
Brian Corr Brian Corr is offline
Registered User
 
Join Date: Nov 2000
Location: Scotland
Posts: 522
Uninstalled Vogone 2.007 then installed Vogone 2.008

No problems to report. Played about with a wav file for a few minutes before I head to work. It all loads up fine.

The loop plays fine. The VU meter works well as adjusting the output made some terrible noises with the RED peak illuminated.

Will try some more tonight.
__________________
Desktop
Windows XP Home
AMD Athlon 64 3400+
1024MB DDR RAM
256MB ATi Radeon 9800SE
Realtek AC97 On Board Audio


Laptop
Windows XP Home - Service Pack 2
Intel Celeron 2.8ghz
1gb Ram
Radeon IGP 345M
  #3  
Old July 24th, 2001, 07:40 AM
DonWhite DonWhite is offline
Registered User
 
Join Date: May 2001
Location: Ottawa, ON
Posts: 25
Installation works properly now. The manual ends up in the correct location.

Program starts with no problem.

The 'Adjust Filters and Channels Top to Bottom' buttons and sliders have been rearranged but the tab order was not adjusted.
  #4  
Old July 24th, 2001, 11:35 AM
kellifa kellifa is offline
Registered User
 
Join Date: Nov 2000
Location: Ames, IA 50010
Posts: 50
Wink I am Testing Vogone 2.008

I downloaded Vogone 2.008 and had no problem installing it and it seems to be up and running just fine. I will report in more detail later.

Peace, Kelli
__________________
kelli
  #5  
Old July 24th, 2001, 03:07 PM
djkaraok djkaraok is offline
Registered User
 
Join Date: Apr 2001
Location: Boise, ID
Posts: 37
Good Job

Great! I downloaded the new 2.08 version and it installed correctly and when I selected the icon from the desktop it also works now. The manual appears to have such a major remake that I will re-read the manual and follow the instructions in order to see if the neophyte can use the product. It is a much more impressive manual at first glance. Great Job!




Jerry
  #6  
Old July 24th, 2001, 03:12 PM
joethermo joethermo is offline
Registered User
 
Join Date: Dec 2000
Location: Windsor, Vt.
Posts: 38
Downloaded and installed fine. Went through the manual and processed first song. When I selected the name to save to and "write", sorry to report, it continues to write endlessly (looping). I had to cnt-alt-del to end Vogone (not responding). Did this twice to varify. I'm going to clean up some files and try again.

JOE
  #7  
Old July 24th, 2001, 06:21 PM
Brian Corr Brian Corr is offline
Registered User
 
Join Date: Nov 2000
Location: Scotland
Posts: 522
Have just tried out the above fault and I get the same thing.
__________________
Desktop
Windows XP Home
AMD Athlon 64 3400+
1024MB DDR RAM
256MB ATi Radeon 9800SE
Realtek AC97 On Board Audio


Laptop
Windows XP Home - Service Pack 2
Intel Celeron 2.8ghz
1gb Ram
Radeon IGP 345M
  #8  
Old July 24th, 2001, 07:18 PM
djkaraok djkaraok is offline
Registered User
 
Join Date: Apr 2001
Location: Boise, ID
Posts: 37
Universal Problem

Oops! Seems like the same problem with the looping is consistent with a variety of users including me.


Jerry
  #9  
Old July 24th, 2001, 09:26 PM
DonWhite DonWhite is offline
Registered User
 
Join Date: May 2001
Location: Ottawa, ON
Posts: 25
The save problem mentioned by joethermo, Brian Corr and djkaraok seems to occur only if you adjust either the Loop Start or Loop End settings.

If you set the Loop Start and Loop End back to the start and end, respectively, of the file then the Write File option works properly.

It might be possible to reset Loop Start and Loop End to their initial positions when the Write File buttom is clicked, prior to outputting the file.
  #10  
Old July 24th, 2001, 09:40 PM
DonWhite DonWhite is offline
Registered User
 
Join Date: May 2001
Location: Ottawa, ON
Posts: 25
Oops. Bite my tongue. Sometimes, resetting the loop controls to the extremes does not work.
  #11  
Old July 25th, 2001, 02:43 AM
MikeP MikeP is offline
VIP
 
Join Date: Nov 2000
Location: Gippsland Lakes, Victoria, Australia
Posts: 3,014
My testing has revealed the same issues as already reported.
The increased amplitude can cause terrible noises to appear and will have to be handled very carefully. I would like to hear from other testers regarding this issue as I'm not 100% convinced that there isn't a more serious problem with it. It might be worth adding appropriate text to the manual in the troubleshooting area about this.
I'm not going to do the write file test as it is clear from other posts that there is a bug to fix.

Apart from these two issues, I think it's great!
  #12  
Old July 25th, 2001, 09:55 AM
kellifa kellifa is offline
Registered User
 
Join Date: Nov 2000
Location: Ames, IA 50010
Posts: 50
I am testing V2.008

When I first ran this new version, it all started out great. I did run into the same problem with the loop that everyone else is having, but when I did a CONT/ALT/DEL to get out of it, it still saved the new file. So I thought, OK, this is working. I probably just goofed up something somewhere to get caught in the loop. However, (after telling Dave I wasn't having any problems) after I did some testing, it did go into the loop everytime, although when interrupted as above, when I went back the new file was saved. But, when I play back the file, it doesn't reflect the changes that I made before I saved it. It comes out the same as the original song. Sorry Dave, I didn't mean to mislead you. By the way, I am running Windows ME.
I was really happy with the amount of vocals I could remove (and this is the first version that has come even close to doing that). I could remove almost all of the lead singers voice, I could remove the lead singers voice and leave the back up, I could have a lot of fun playing with a song. But it won't save the changes I made in the song. It does go into the Loop, I break in and stop it, I have the new file I set up and named, but there are no changes saved.
I did three songs, Goodbye Earl - Dixie Chicks, The Little Girl - John Michael Montgomery & Barbara Ann-The Beachboys.
I don't know if you need to be concerned about the bizarre noises (special effects?) that you can get when you play around with the controls, especially when you go into the red zone, but I can make a song sound really weird. I think people will have to be really careful when adjusting the controls.
Peace,
Kelli
__________________
kelli

Last edited by kellifa; July 25th, 2001 at 10:11 AM.
  #13  
Old August 17th, 2001, 11:47 AM
admin admin is offline
Administrator
 
Join Date: Oct 2000
Location: Raleigh, NC, USA
Posts: 10,515
Cool Fixed the bugs!

We found and version 2.009 has the fixes for the problems you have reported in version 2.008.

Great Job folks!
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -4. The time now is 01:51 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2009 - 2024, Jelsoft Enterprises Ltd.
The contents of this forum are copyrighted by Micro Technology Unlimited, 2000-2008. Use of any material from these Forums is prohibited without written agreement from MTU.