|
Microstudio Help Post Microstudio questions, tips and suggestions here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
reinstalling microstudio to windows xp
When trying to reinstall microstudio from cd to windows xp, the following feature transfer error occurs. "Error:-1612 The installation source for this product is not available. Verify that the source exists and that you can access it."
What must I do to get microstudio back on the computer. |
#2
|
|||
|
|||
Did you do an update to Windows XP from another operating system?
It sounds as if something is damaged in the Operating system, I would recommend a refomat to fix this problem. If Microstudio is still showing as installed on the sytem, then try completely uinstalling it and see what happens.
__________________
Bryan, MTU |
#3
|
|||
|
|||
reformatted the hard drive, reinstalled microstudio, it now works, but is there a way to increase the write time to cd. My cdr is capable of 12X.
|
#4
|
|||
|
|||
Make sure that you have the DMA turned on, which I think under XP requires installing updated drivers for the Motherboard Chipset.
I would try to update your ASPI drivers first, you can do that from: http://www.mtu.com/vbulletin/showthr...p?threadid=493 Or make sure that your speed is changed under the Drives Menu, Speed Selection. I recommend setting this to AUTO for Read and Write, which will go as fast as the drive will allow it.
__________________
Bryan, MTU |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|