![]() |
|
Microstudio Help Post Microstudio questions, tips and suggestions here. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Printing the Microstudio Manual
Have tried to print the manuals of the programs I have but the words on the right side of the page are not all there. Any help is appreciated. thanks
elpaso |
#2
|
||||||||||
|
||||||||||
If you can edit the mstudioman.htm file...
DOWNLOAD THE MANUAL
Click here to download the Microstudio Manual. TRY FIRST: Make sure your Printer Setup has sufficient RIGHT and LEFT margins for your printer. Our manual is an HTML format document. It is formatted on the fly by your computer for the selected printer. I'd say your margins are set too small for your printer, which is causing text to not print. TRY SECOND: If you have an HTML Editor program, open the mstudioman.htm file found in the Microstudio/Manuals/ folder. Immediately below the tag near the top of the document, you will see a start TABLE tag like this: <table width="90%" align="center" BORDER="0" CELLSPACING="0" cellpadding=15> This sets the overall width of the document text. Change the width="90%" to "80%". This will make the document narrower so it will all print. Try page 3 as a test. If 80% is not enough, change it to 75%. However, I think 80% should do it for you. ]If you don't have an HTML editor, open the mstudioman.htm file in Notepad. It may take a while. Be very careful to only change the
«
Previous Thread
|
Next Thread
»
All times are GMT -4. The time now is 10:28 PM.
|