|
Microstudio Help Post Microstudio questions, tips and suggestions here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
712a will write to disc
Invoice # 20245 dated 1/10/2005
Program and drive installed without any problems, except the drive will not write to disc. Drive will read to harddrive and will play cd-g from harddrive and disc, but cannot write copy. What information do you need to help solve this problem. |
#2
|
|||
|
|||
Re: 712a will write to disc
Are you getting any error messages? If so Please make sure to post exactly what you are getting. Also here is a list of known errors and how to fix them: http://forum.mtu.com/showthread.php?t=3622
__________________
Bryan, MTU |
#3
|
|||
|
|||
Re: 712a will not write to disc
Error : START DAO RECORDING Command failed on device 1:1:0 Disc type not supported
|
#4
|
|||
|
|||
Re: 712a will not write to disc
I'm sure someone has some idea about this problem. How about some help on this issue ? Burner drive works well with other software, just not with 2.609
|
#5
|
|||
|
|||
Re: 712a will write to disc
This error is explained at: http://forum.mtu.com/showthread.php?p=23759#post23759
__________________
Bryan, MTU |
#6
|
|||
|
|||
Re: 712a will not write to disc
I have tried everything listed in this post and I still have the same problem, every thing works except the writing to disc. I have no idea where to go from here.
|
#7
|
|||
|
|||
Re: 712a will write to disc
Terry,
There is some program that is tying up the ASPI drivers. You need to look at what you have Installed on your computer. If you go to Add/Remove Programs and list every item in this, minus all the Windows Hotfixes and Service packs, then I might beable to tell you what to try, that may fix this. If you have any USB Camera software loaded you might try removing this also to see if this is what is causing the problems.
__________________
Bryan, MTU |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|