|
Microstudio Help Post Microstudio questions, tips and suggestions here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Plextor drives that don't Support CD+G
HAVE PLEXTOR PX 504 A WORKS FINE WITH OTHER SOFTWARE.CD-R S WILL COPY WITH OTHER SOFTWARE.
__________________
FRANK MORIN |
#2
|
|||
|
|||
This is one of the only drives by Plextor that doesn't support the CD+G format. It is listed in our post of drives that won't work, which is located at: http://forum.mtu.com/showthread.php?threadid=1106
It will work with other software to do a complete duplicate of a disc, but there is no way to make it work with our software to remove one track at a time or actually play back from. You can check the specs on Plextor's site and it states that it doesn't support the CD+G format also. There is no way to make it work, without replacing the drive. Plextor didn't make this drive Ricoh did, Plextor just marketed this model. This is why it won't work. The Plextor PX-W 708 drives were made by Plextor and will work correctly for supporting the CD+G format.
__________________
Bryan, MTU |
#3
|
|||
|
|||
The reason that Plextor did this is because they were a few months behind on coming out with their Plextor PX-W708A so they decided to purchase the Ricoh drive and market it as a Plextor.
Here are the actual specs from Plextor's website: Useable DVD Formats: DVD-ROM, DVD Video, Multi Border (closed disc read only), multi session Useable CD Formats: CD-DA; CD-ROM Mode 1; CD-ROM Mode 2; CD-ROM XA, CD-I; Photo CD; Video CD; CD-Extra; CD Text; Multi-session, UDF Recording DVD+R/RW Modes: Sequential write, Random access write and Disc-at-one Then they came out with the Plextor PX-708 models that do support the CD+G formats. This was the drive they had been working on, which is why they were behind in the DVD+-R market.
__________________
Bryan, MTU |
#4
|
|||
|
|||
Re: Plextor drives that don't Support CD+G
Plextor PX-230A does not support Karaoke CD+G. It only supports the Video CD Format.
__________________
Bryan, MTU |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|