MTU.Community


Go Back   MTU.Community > Microeditor Software > MicroCD Help

MicroCD Help General forum for discussing MicroCD and audio CD mastering.

Reply
 
Thread Tools Display Modes
  #1  
Old June 28th, 2003, 03:52 PM
MMVOX MMVOX is offline
Registered User
 
Join Date: Jun 2003
Posts: 13
Question MicroCD V2.403 with Plextor PX-W4824TA Drive

Just installed new Plextor PX-W4824TA CD-RW drive and MicroCD Version 2.403. MicroCD says it can't find a CD recording device. There's no problem, however, when I burn audio CD's using EZ CD creator. Any know how I can get MicroCD to work with this new burner? Please let me know in layman's terms! Thank you.
Reply With Quote
  #2  
Old August 8th, 2003, 07:05 PM
OmegAudio OmegAudio is offline
Registered User
 
Join Date: Aug 2003
Location: Raleigh NC
Posts: 8
ATAPI Manager Not Found

I just installed all Microsound 5.5 and MicroCD 2.403 in new machine. WIN XP Pro, Intel D845GBV MB, Intel P4 1.8, 512MB RAM, 40GB WD HDD, Plextor 48x24x48 CDRW. Microsound apears to work well, MicroCD will not run. I have followed the installation of ATAPI as listed on support. But I continue to get the message:

Error: Unable to initialize the ASPI manager
ASPI support information was not found

Verify results and press any key to return to Windows.
Press any key to continue . . .


The versions I have installed are listed below.
ASPI32.SYS 4.71.2
WOWPOST.EXE 4.5.7 (1008)
WINASPI.DLL 4.5.7 (1008)
WNASPI32.DLL 4.5.7 (1008)
Reply With Quote
  #3  
Old August 9th, 2003, 10:35 AM
danny_g danny_g is offline
Frequent Member
 
Join Date: May 2001
Posts: 485
Re: ATAPI Manager Not Found

Quote:
Originally posted by OmegAudio
I just installed all Microsound 5.5 and MicroCD 2.403 in new machine. WIN XP Pro, Intel D845GBV MB, Intel P4 1.8, 512MB RAM, 40GB WD HDD, Plextor 48x24x48 CDRW. Microsound apears to work well, MicroCD will not run. I have followed the installation of ATAPI as listed on support. But I continue to get the message:

Error: Unable to initialize the ASPI manager
ASPI support information was not found

Verify results and press any key to return to Windows.
Press any key to continue . . .


The versions I have installed are listed below.
ASPI32.SYS 4.71.2
WOWPOST.EXE 4.5.7 (1008)
WINASPI.DLL 4.5.7 (1008)
WNASPI32.DLL 4.5.7 (1008)
had a situation where 2 of my programs were not reckognizing one of my cd drives- my CD+G writer itself. Fixed it by dragging a copy of wnaspi32.dll into the folder containing those 2 programs and both programs immediately reckognized the drive. thankfully it wasn't an MTU product that wasn't reckognizing the drive.
Reply With Quote
  #4  
Old August 9th, 2003, 02:27 PM
OmegAudio OmegAudio is offline
Registered User
 
Join Date: Aug 2003
Location: Raleigh NC
Posts: 8
Angry Known Device

I have gone from not recognized ASPI Manager to now having an unrecognized deviced. I have downloaded and installed all of the recommended ASPI drivers, axcept for the MTU recommended ones because the link was bad. I have been able to find and install version 4.5 and 4.7 but not a 4.6. Can anyone offer assistance in making Micro CD Work?
Reply With Quote
  #5  
Old August 9th, 2003, 04:56 PM
OmegAudio OmegAudio is offline
Registered User
 
Join Date: Aug 2003
Location: Raleigh NC
Posts: 8
Unhappy ASPI Drivers

I have found ASPI 4.6 at this site.

http://www.musicex.com/mediajukebox/aspi.html

There also is a download for 4.7 on the same site.

After successfully installing 4.6 I am presented this message:

Error: Unable to find a known CD-Recorder device!

Verify results and press any key to return to Windows.
Press any key to continue . . .

I have successfully burned 8 CDs, both data and music using Nero 6.0. I am awaiting help from all.
Reply With Quote
  #6  
Old August 11th, 2003, 03:19 PM
MTUSUPPORT MTUSUPPORT is offline
Moderator
 
Join Date: Nov 2000
Location: Raleigh, NC
Posts: 5,253
OmegAudio,
The Plextor 48x drive is not supported under MicroCD 2.403. The 40x Plextor was the last supported device. I will ask ADMIN what to should be done about this.

ASPI Drivers are located on our site at: http://forum.mtu.com/showthread.php?threadid=493
__________________
Bryan, MTU
Reply With Quote
  #7  
Old August 11th, 2003, 09:53 PM
OmegAudio OmegAudio is offline
Registered User
 
Join Date: Aug 2003
Location: Raleigh NC
Posts: 8
Question Plextor Drive

When I inquired about hardware to purchase for this machine I was told to purchase a Plextor. When I inquired if a 48x would work I was told "Yes". If we change the firmware to make the drive think it is a 40x will this work? Or am I down to purchasing a less than 40x drive?
Thank you for the download link.
Reply With Quote
  #8  
Old October 18th, 2003, 01:19 PM
OmegAudio OmegAudio is offline
Registered User
 
Join Date: Aug 2003
Location: Raleigh NC
Posts: 8
Smile MicroCD

I wanted to post a reply and sing the praises of MTU.
I built a new machine to replace my MTU Intel 233 workstation.

After building the machine as recommended, MicroCD did not recognize the Plextor CDRW. I posted here for a solution, and shortly there after MTU sent me a correction to MicroCD so it would work with the faster Plextor Drive.
No other company I have delt with provides this kind of support.
Thank you MTU.
Chris
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -4. The time now is 03:43 AM.


Powered by vBulletin® Version 3.7.1
Copyright ©2009 - 2024, Jelsoft Enterprises Ltd.
The contents of this forum are copyrighted by Micro Technology Unlimited, 2000-2008. Use of any material from these Forums is prohibited without written agreement from MTU.