|
Microstudio Help Post Microstudio questions, tips and suggestions here. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Error: Serial Number doesn't match Registration Information
I have a Sony Vaio notebook with 98SE.
I saw somebody else had this problem also in another thread that Bryan responded to. After installation (and reinstallation -- I tried that also), the program will not start up. It says my "serial # doesn't match up with registration info". I cut and pasted the registration code from the email you sent me and my email is correct. I'm using Windows98, so the administrator stuff shouldn't really apply. Any help would be appreciated. The main reason I'm trying your product is the multi-session problems that Chartbuster presents on their last track. I noticed that your web site says that with some extra effort I can get these extracted. Respond as soon as you can. Thanx, Oakley |
#2
|
|||
|
|||
Oakley,
First, you must run all of the Windows Updates. If you have not done ALL of the updates, this will occur. Next, we just found that this is a bug in our security that only occurs with Windows 98SE or ME. Work-Around! Install a network card. So for your older laptop, you need to get a USB network card and just plug it into the laptop. It doesn't have to be activated, just plugged in. You can use a USB network module outside the Laptop if you don't have a port to plug into. Our engineer is working on a fix for this, but it is not solved yet.
__________________
Bryan, MTU |
#3
|
|||
|
|||
Microstudio Serial# Error
Hi. I just bought the Suite 4, the Internal CD burner and 100 CD's from mtu website.
I installed all the software. The only one not working is the Microstudio. Keep saying that I have a wrong Registration Code. I installed and uninstalled the software several times. I also copied the registration code from the email I'd received. No spaces before or after the number. I'm using Win 98se. The demo runs perfectly. Any idea? Thanks in advance. Diego
__________________
Diego De Pietri DDP music Los Angeles, CA www.ddpmusic.com |
#4
|
|||
|
|||
Serial No Match for Registration NEW PROBLEM
Serial No Match for Registration NEW PROBLEM
I read the posts for this problem, last one was to install a network card temporarily until this has a solution for op sy such as ME which I have. I am on a wireless network with a wireless card installed by Roadrunner on a laptop. Now what? I cannot install both! I just bought this software, getting very discouraged here. Thanks!
__________________
terriiii |
#5
|
|||
|
|||
Terriii,
If you have a Wireless network card, this should correctly work. Are you still unable to make the program work?
__________________
Bryan, MTU |
#6
|
|||
|
|||
ddpmusic
Here is the answer to your problem. It is due to your computer not having a network card installed. Read my posts above.
__________________
Bryan, MTU |
#7
|
|||
|
|||
To all with this problem
We have discovered a rare bug in our security code.
It only happens with Windows 98SE or ME when there is no Network (Ethernet) card installed in the computer. To overcome this problem now, please obtain any ISA or PCI bus Network card, install it and remove then reinstall Microstudio 2.604. We found some cards for $16 that worked fine. If this does not solve your problem, post back here. We are now working on a software code fix for this "Serial # mismatch error" problem. We currently expect to have this available for you to test within 1-2 weeks, with a full release by the end of July. Note this warning! Since Microsoft has formally announced they will discontinue Windows 98 and ME in 2005, we will discontinue support of 98SE and ME before the end of 2004. We simply can't justify the ongoing expense to support these outdated Operating Systems. We value each of you as our customer, so please make plans to replace your older 98/ME computers and move up to Windows XP Home or Pro. Last edited by admin; May 17th, 2005 at 07:20 AM. |
#8
|
|||
|
|||
Re: Error Msg: Serial # doesn't match registration info
i have the same problem. I run win98 2nd edit. Microstudio version 2604. It was working now it is not. it says serial # does not match reg#. I have unistalled and reistalled. I copied and pasted the info for regestration. still no luck
|
#9
|
|||
|
|||
Re: Error Msg: Serial # doesn't match registration info
Merooster,
You must have a Network card installed in your computer or you will always get this error. The above posts will answer your problems.
__________________
Bryan, MTU |
#10
|
|||
|
|||
Re: Error Msg: Serial # doesn't match registration info
Quote:
|
#11
|
|||
|
|||
Re: Error Msg: Serial # doesn't match registration info
Howdy:
Everything works fine on XP - good investment folks - I strongly recomment you upgrade Cheers Elaine |
#12
|
|||
|
|||
Re: Error Msg: Serial # doesn't match registration info
Bryan,
Any help yet with the Serial #/registration problem ? I'm wondering if I missed a download somewhere. I'll be upgrading to XP in a couple of weeks-but would like to get the new version of Microstudio working sooner-if possible. No room on my motherboard for another card (network)-(will be rebuilding soon). Al North |
#13
|
|||
|
|||
Re: Error Msg: Serial # doesn't match registration info
Alan,
We don't yet have a fix for this. The engineer is still working on it, we may have one soon, but not sure yet. If you add a USB network card it would work.
__________________
Bryan, MTU |
#14
|
|||
|
|||
Re: Error: Serial Number doesn't match Registration Information
If anyone is still having this problem please Post here, I now have a new version of Microstudio that should fix the problem.
__________________
Bryan, MTU Last edited by admin; May 17th, 2005 at 07:22 AM. |
#15
|
|||
|
|||
Re: Error: Serial Number doesn't match Registration Information
Bryan,
I downloaded the new version and it works fine. Knew I could count on you and MTU ! Thanx, Al North |
#16
|
|||
|
|||
Re: Error: Serial Number doesn't match Registration Information
I am having the same problem as the previous person. I have Windows 98SE and am getting the serial number does not match reg info. Pleqase help as I am getting frustrated!
.....I have an Ethernet card. Last edited by admin; May 17th, 2005 at 07:23 AM. |
#17
|
|||
|
|||
Re: Error: Serial Number doesn't match Registration Information
Quote:
|
#18
|
|||
|
|||
Re: Error: Serial Number doesn't match Registration Information
No luck. I have run the updates, I have a network card. I did noticed in the registry that I still show that2.605 AND 2.315 are both in there. Your program only lets me delete the 2.605 and not the 2.315. It looks like the only way to get out the 2.315 is to do it through the windows program.Or maybe I should delete out the 2.605 with Windows and try to run your install program again to get out the 2.315?
|
#19
|
|||
|
|||
Re: Error: Serial Number doesn't match Registration Information
Quote:
|
Currently Active Users Viewing This Thread: 4 (0 members and 4 guests) | |
Thread Tools | |
Display Modes | |
|
|