Vogone High filter

dwhiting · #1 April 15th, 2003, 02:20 PM

Hi I looked through the forums posted on this website but could not find any help with my problem. I recently purchased Vogone 2 and I am not impressed with its performance. I do not find it any better than other vocal removers available including Dart. When trying to fine tune the vogone result, I can only hear a difference in it when moving the low filter slider. As I move the slider to the left it does cancel more of the voice but no matter which way I slide the high the result sounds the same. I have tried several songs with the high to the extreme right and the same songs with the high to the extreme left and there is absolutely no audible difference in the result. I can however hear a difference when I playback just the high and move the slider but not when I playback the vogone result. It seems the high processor is not working together with the low processor for the final result. I am running the software on a AMD 800MHz with 192Mb RAM. Can anyone help me with this problem?

kjzone · #2 April 15th, 2003, 03:42 PM

dwhiting........your answer is in this link.

http://forum.mtu.com/showthread.php?s=&threadid=1506

dwhiting · #3 April 15th, 2003, 08:33 PM

Hey thanks for the reply but I followed the instructions on that thread exactly but still cannot hear any difference whatsoever when I move the high slider while playing the vogone result.

kjzone · #4 April 16th, 2003, 01:49 PM

No problem.......

Just means nothing recorded in the high range can be taken out.
Human voice is recorded mostly in 1-2 K range.

dwhiting · #5 April 22nd, 2003, 10:33 AM

I've tried all different types of songs and it has no effect on none of them. Why is it there if it has no effect on the output result?

**admin** · #6 April 23rd, 2003, 08:24 PM

Vogone's Hi Adjust filter does modify the high frequencies if they are present. If Vogone runs at all, it is working and all parts are working... otherwise it would crash.

If you have tried various discs with female voice for the singer, then the only other variable I can think of is your speakers are not reproducing the high frequencies.

Can you play a CD through Media Player and hear higher frequencies than you hear from Vogone while playing using the High Play button? If not, your speakers and amp may be reducing the bandwidth you can hear. This is a normal problem we run into and may be the reason.

dwhiting · #7 April 28th, 2003, 12:49 PM

I've tried both male and female singers from CD. I've devocalized the same songs with Dart Devocalizer and with Vogone and burned the resulting Bin files to a CD. I've played the CD in various stereo systems and cannot hear any difference between the Vogone and Dart results. Because Vogone offers the high filter and Dart doesn't, I would expect Vogone to be better, but was not.

**admin** · #8 May 19th, 2003, 05:32 PM

What version are you running so we know.

Because of your post, I went back and did some testing in our current under-development version. It turns out the high adjuster was disabled and not affecting the processing! This was a result of our engineer doing some testing, and he forgot to re-enabled it.

However, I have not verified if it was disabled in the current ship version or not. The next upgrade will be free to all and should be out this month.

dwhiting · #9 May 19th, 2003, 07:32 PM

Hi, I am running version 2.104 of Vogone.

dwhiting · #10 June 2nd, 2003, 11:40 AM

Did you find out about the high filters in this version yet and when the new version is being released.

George · #11 June 2nd, 2003, 12:22 PM

I uninstalled 2.200 and installed 2.104. The high filter is working in mine.

George

dwhiting · #12 June 5th, 2003, 02:27 PM

Hey admin, did you do any more research on this problem yet?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)