Bose ToneMatch Audio Engine and L1 Compact

[Wrahn]

I have the two Bose\\\'s installed with my Hoster. I have a problem with my
ToneMatch the audio doen\\\'t work. I have the cable from the ToneMatch to my computer\\\'s USB but no sound. I tried two other cables and I even used my secondary Hoster in my other computer.

HELP! please.

Wes Rahn

The Mike\'s work with the L1 Compact.

[Roy Dennis]

I\\\'m not familiar with Bose products but as you say you have tried 2 different cables and your other computer it seems something wrong wth the Tonematch itself.
I would check you have usb selected as your source input.
Found this on google search so check it out first.
https://www.bose.co.uk/en_gb/support...e/article.html

[Roy Dennis]

The other thing to check is your tonematch selected as the audio output souce.
If you can see a small speaker icon right hand side of your taskbar click on it to expand it that should show which output is selected. If you can see your tonematch there select it.

In your Hoster Tools/settings/Audio make sure your tonematch is selected as your playlist Audio card.

[Wrahn]

Once again thanks for being there.

I can buy another T1 Tone Match for about $350 but can I also use a Yamaha MG06X to use with my MTU?

Thanks,
Wes

[Roy Dennis]

Well assume you\'ve tried the above and still not working?

The MG06X will work with Hoster but as far as I can see it does not have Usb input therefore you would have to use computer headphone out socket to connect to it.
As I stated before, i am not familiar with L1 speaker set up so can not advise you on connecting to them from the MG06X.

Waltr used to have a Bose set up if he reads this he might be able to help.


Have you tried connecting your Tonematch via the computer headphone socket see if you get any joy that way.

One last thing, was this all working recently or is it a new system your trying to add?