|
|
|||||||
| Microstudio Help Post Microstudio questions, tips and suggestions here. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
April 12th, 2009, 02:45 PM
|
|||
|
|||
|
If I recall right, you have two PX 716 drives. I can hardly believe they are both bad. Have you tried using just one drive for reading and writing, then tesing the same with other drive?
I have some other ideas after I hear back from you. In the meantime I will look over the other posts here to make sure I understand what is going on.
__________________
Main Machine - Owner - Brent OS - Windows 7 Ultimate 64 bit CPU - AMD 1100T Six Core Mobo - GIGABYTE GA-990XA-UD3 AM3+ RAM - 16 GB Patriot DDR-3 1333 MHz Video Card - GeForce GT 740 4 GB - Dual Monitors Drives - Plextor PX-810 SATA & Lite On iHAS HDD - WD 500GB Sata Drives x 4 Speakers - Inspire 5.1 5700 Digital 
|
|
#3
April 12th, 2009, 06:51 PM
|
|||
|
|||
|
It seems to me that you said you have not used Microstudio for a long time and it used to work fine. In the meantime you are burning DVD's OK. Sometimes I know that Roxio will act up with Microstudio.
Do you still have your microstudio set up exe file? If so, I would suggest you uninstall microstudio using Conrol Panel. Reboot, then re-install MS and reboot again. What version of MS are you using and what OS are you using?
__________________
Main Machine - Owner - Brent OS - Windows 7 Ultimate 64 bit CPU - AMD 1100T Six Core Mobo - GIGABYTE GA-990XA-UD3 AM3+ RAM - 16 GB Patriot DDR-3 1333 MHz Video Card - GeForce GT 740 4 GB - Dual Monitors Drives - Plextor PX-810 SATA & Lite On iHAS HDD - WD 500GB Sata Drives x 4 Speakers - Inspire 5.1 5700 Digital
|
|
#5
April 13th, 2009, 01:06 AM
|
|||
|
|||
|
You have the best version of MS and it works great with XP. In record settings in tools (MS), is the correct sound card selected?
Do as I suggested. Uninstall and reinstall MS. You have a setting or link missing.. Again, check the sound card setting. Additionally, be certain all of your drivers for video, sound and motherboard are the most current. Last resort uninstall Roxio. OK, now I'm out of ideas.. but if you have done all of that it should be working..
__________________
Main Machine - Owner - Brent OS - Windows 7 Ultimate 64 bit CPU - AMD 1100T Six Core Mobo - GIGABYTE GA-990XA-UD3 AM3+ RAM - 16 GB Patriot DDR-3 1333 MHz Video Card - GeForce GT 740 4 GB - Dual Monitors Drives - Plextor PX-810 SATA & Lite On iHAS HDD - WD 500GB Sata Drives x 4 Speakers - Inspire 5.1 5700 Digital
|
|
#6
April 13th, 2009, 08:12 AM
|
|||
|
|||
|
Quote:
open up MS and go to tools and click on default drive, see if it says read /write -yes
__________________
BILLY O' WEEKEND.DJ Las Vegas, NV
|
|
#7
April 13th, 2009, 01:58 PM
|
|||
|
|||
|
I checked and I get both a yes on read and write on both of my plextor drives.
I did a reinstall of Microstudio and tried to burn a CD-G it still doesn't work, the error says user abort error and error burning disc when it hits at 20% burn. I removed the roxio program no change still the same errors in Microstudio Last edited by ASAYAS104; April 13th, 2009 at 02:11 PM.
|
|
#8
April 13th, 2009, 02:47 PM
|
|||
|
|||
|
You have a very unusual issue going on. You will need to go to customer support at Miscrostudio. Referrence all the hot links in this thread.
__________________
Main Machine - Owner - Brent OS - Windows 7 Ultimate 64 bit CPU - AMD 1100T Six Core Mobo - GIGABYTE GA-990XA-UD3 AM3+ RAM - 16 GB Patriot DDR-3 1333 MHz Video Card - GeForce GT 740 4 GB - Dual Monitors Drives - Plextor PX-810 SATA & Lite On iHAS HDD - WD 500GB Sata Drives x 4 Speakers - Inspire 5.1 5700 Digital
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
