just upgraded to 4.06

[billyo]

Originally Posted by Joe Nieves

Hi billyo

Joe....

i used a single 1/8 cable to 1/4 trs cable, tried using a single 1/8 to a rca cable to a y 1/4 mono adaptor plugged into a single channel, didnt work either..

[ddouglass]

Billy is that a stereo 1/8" plug? If not that may be your problem. Your computer output is stereo which requires a TRS 1/8 to a TRS 1/4 to get the 2 channels to the mixer.

[billyo]

Originally Posted by ddouglass

i had 1/8 to rca to a y 1/4 adapter cable plugged in at the time while i was having this problem, yes its is now 1/8 to 1/4 trs cable and by using that cable i solved the vocal problems..

[ddouglass]

No wonder you had a problem since you were combining both channels. It is hard to stop the vocals that way.

[billyo]

Originally Posted by ddouglass

No wonder you had a problem since you were combining both channels. It is hard to stop the vocals that way.

the funny thing was i have the same cable 1/8 to rca to 1/4 y adapter and it works fine on my show laptop running 4.05. but anyway all is good

[bryant]

Originally Posted by billyo

the funny thing was i have the same cable 1/8 to rca to 1/4 y adapter and it works fine on my show laptop running 4.05. but anyway all is good

That happens sometimes to me in the past, the tolerance between the two (machine and cable) just quite isbn't right on one and lucky to be on the other. I'd throw the cable away.

[billyo]

[quote=bryant;84882]That happens sometimes to me in the past, the tolerance between the two (machine and cable) just quite isbn't right on one and lucky to be on the other.

I'd throw the cable away.[/quote

]


can't do that this cable is expensive i still could use it ...