The Future of Microsound?

[Rich LePage]

You're right of course about the op amps and the rest.

Amazed though you'd mod a Tascam Model 5 in terms
of the cost of the mods versus the rest of the parts, like
faders, switches, and so much else. But if it works for you,
that's great.

Your logic about diff coloration seems sound to me.
I know several folks who have done diff channels of
a board set up completely diff. in terms of channel
strips, op amps, EQs, pres, and so on. One guy managed
to build a board with Neve, Trident, API and several other
modules in the thing- in blocks of 8 channels I think.

I still have a real ancient Model 5 somewhere in storage, from
way back when I used it sometimes with a Teac 1/2" 8 track
and DBX. I did some location jazz albums in clubs that way, but
the stuff wasn't exactly built for the road and could get pretty dodgy.

I viewed that stuff mostly as "acquisition devices" for work like that.
You could do those jobs taking up only one or two tables in a jazz
club-- which was a big deal to the club owner too...

Big studio boards suffered from the same "go through so much stuff"
you mention. Examples include MCI boards (and mult passes through
the VCAs especially), and Audio Designs, which were real popular
around NYC for a while. With Audio Designs you were also going
through a zillion transformers. Every stage of the board was
boosted up to +4 or +8 and balanced- then passed on to the next
stage and done all over again, whether it was needed or not.

Result was a TON of coloration. I'm sure not against
transformers (many folks were/are)-- but that many-- geez-
between that and the early op amps it was a battle every time.
Phase shift, and the slewing problems of the early op amps--
you could def. hear all that stuff big time- not to mention
noise buildup from all those gain stages.

Luckily that vintage usually had a lot of patching and so you
could bypass some stages of the board if you had a zillion
patchcords and got there plenty early before the session start!
I used to carry around a bag of extra patch cords back then...

With the MCI's (later Sony) a lot of people modded them,
I know a few who still use 'em. One in particular is still used
for a lot of high-profile acoustic jazz work and sounds very
good -- but HEAVY mods.

Neve did things differently. You sure can't say Rupert's
stuff didn't color things, but a lot of folks still prize that
partic. coloration. A lot of those boards were parted out
because the modules etc became worth more $ individually
than as an entire console.

Cleanest (in terms of coloration) preamp we have is an
early one by John La Grou (Millennia) who was an Medit
user as you likely know. Probably a result of his extensive
classical recording work.

I like the old Soundcraft, we still run it in one mostly analog
production/mix room which also has 2 old Medit systems
with Microsync (486 CPUs, m/boards with an ISA slot!!-gosh..)
At some point that room will get repurposed probably,
but we still do some restore-from-tape work and other things
that it's useful for, though less every year. Oh yeah, a convection
OVEN is also a feature of that room! (for shake and bake that tape!)

And like Geezer noted, every time you use that stuff, you are
SO reminded of all the alignment and tweaking issues that used
to be part of every day work. Often hard to just sit down and mix
without first having to put on the tech hat for a while.