Music skips and sometimes Hoster crashes

[stublack]

Howdy, thanks for all the suggestions. I have to admit I'm not sure I understand what everybody is talking about (and it's possible that's my biggest problem).
I am looking at a Vizio monitor that I purchased awhile back. It has HDMI, VGA, USB, component (Red, Green, & Blue) and coax but no composite (yellow).

I have looked around for small flat screen TV's with the composite (yellow) and could not find one at Walmart or Best Buy, but did found one at Sears I don't remember the brand (I can find out). Because, of that I don't believe this is unique to Vizio. One of the Venues I have has a large flat screen TV (I think LG) with no composite (yellow) and another older TV with coax only. With my Window 7 computer I can go from headphone jack out of PC to my mixing board, go from VGA out of PC to K-World splitter composite (yellow) to another splitter box that converts rca to coax to the older TV, and then component (Red, Green & Blue) out of K-World splitter to the back of the newer large flat screen TV) and that works great.

I can do all this with the new Lenovo Windows 8 PC with VGA but the audio skips real bad (the audio jack in the new Windows 8 computers must be much different than the headphone jacks in all the previous Window PC's).

If you tie into the TV monitors at your bars, when they update these TV's and if you are running one of the newer Window 8 laptops you will probably run into this same situation

I'm not sure what a Scat connection even looks like. Maybe there is another term that I do understand

I'm still attempting to run audio to my mixing board and not my monitors. Tiki how do I connect this modulator to the PC unless it's through the audio jack (or something other than HDMI) and cleans up the skipping problem and will I still have the video problem.

Someone had talked about some settings I need to change will that clean up the audio skipping problem coming from the audio jack?

I do appreciate how everybody is trying to help, Thanks, Stu

[bryant]

Originally Posted by stublack

Howdy, thanks for all the suggestions. I have to admit I'm not sure I understand what everybody is talking about (and it's possible that's my biggest problem).
I am looking at a Vizio monitor that I purchased awhile back. It has HDMI, VGA, USB, component (Red, Green, & Blue) and coax but no composite (yellow).

I have looked around for small flat screen TV's with the composite (yellow) and could not find one at Walmart or Best Buy, but did found one at Sears I don't remember the brand (I can find out). Because, of that I don't believe this is unique to Vizio. One of the Venues I have has a large flat screen TV (I think LG) with no composite (yellow) and another older TV with coax only. With my Window 7 computer I can go from headphone jack out of PC to my mixing board, go from VGA out of PC to K-World splitter composite (yellow) to another splitter box that converts rca to coax to the older TV, and then component (Red, Green & Blue) out of K-World splitter to the back of the newer large flat screen TV) and that works great.


I can do all this with the new Lenovo Windows 8 PC with VGA but the audio skips real bad (the audio jack in the new Windows 8 computers must be much different than the headphone jacks in all the previous Window PC's).

If you tie into the TV monitors at your bars, when they update these TV's and if you are running one of the newer Window 8 laptops you will probably run into this same situation

I'm not sure what a Scat connection even looks like. Maybe there is another term that I do understand

I'm still attempting to run audio to my mixing board and not my monitors. Tiki how do I connect this modulator to the PC unless it's through the audio jack (or something other than HDMI) and cleans up the skipping problem and will I still have the video problem.

Someone had talked about some settings I need to change will that clean up the audio skipping problem coming from the audio jack?

I do appreciate how everybody is trying to help, Thanks, Stu

AllI was saying that the green on the composite will most likely accept a single yellow rca and work fine. The green rca female acts as a single input for a video "yellow" one. Check the online manual of that TV model and it will explain that to you.

[Skybird74]

Originally Posted by bryant

AllI was saying that the green on the composite will most likely accept a single yellow rca and work fine. The green rca female acts as a single input for a video "yellow" one. Check the online manual of that TV model and it will explain that to you.

I've always been curious about this too.......... will green accept yellow?

Found this answer on Yahoo:

"If your TV is one of the newer models that have component, HDMI and RF input jacks, your TV may be able to accept the composite video through the component input. Hook up the red and white audio plugs into the red and white audio input jacks next to the component video jacks. Take the yellow video plug and plug it into the green RCA jack of the component video input. Select the component input, you will get a picture. If you get a black and white picture then your component input won't accept composite video and you will have to use an RF modulator to take the output of your legacy video devices to watch on your TV. "

[RIKKI TIKKI]

Originally Posted by stublack

I'm still attempting to run audio to my mixing board and not my monitors. Tiki how do I connect this modulator to the PC unless it's through the audio jack (or something other than HDMI) and cleans up the skipping problem and will I still have the video problem.

Stu,
The RF Modulator is connected between the HDMI to RCA Mini, and the Older TV. I use a Powered HDMI pigtailed 2x splitter from my Windows 7 computer, with a direct HDMI cable to Singers Display Monitor, and the other HDMI side is connected to the HDMI2AV Mini > Then RCA output to RF Modulator, using a couple of Coax/RCA adaptor plugs, then out to TV (Channel 3 or 4 to be selected on Modulator & TV).

Your problem is more the audio that works through your HDMI connection, where I go from headphone jack to my mixing board... I am sure I will have similar problems when I have to go to Window 8.x computer, but right now, and in the near future, I will stick with Windows 7 and wait and see how you Hoster Users solve the HDMI and RCA audio problems, that you are now experiencing! Good Luck Buddy... I hope the other Windows 8.1 users will chime in and be able to help you!

[stublack]

I checked the small screen Vizio and ran the composite (yellow) from the mini to the back of the Vizio component (green) I got a picture but it was all greenish yellow. I'm gonna check my other big screen TV's here in my home and all of the monitors at the bars, to see if I can get Color. I will post back early next week to let you know if this worked.

Thanks, Stu

[MTUSUPPORT]

Please try upgrading to version 5.31.01 from here to see if that may help any.

[bryant]

Originally Posted by stublack

I checked the small screen Vizio and ran the composite (yellow) from the mini to the back of the Vizio component (green) I got a picture but it was all greenish yellow. I'm gonna check my other big screen TV's here in my home and all of the monitors at the bars, to see if I can get Color. I will post back early next week to let you know if this worked.

Thanks, Stu

You may have to set the TV at A/V, not composite, depending on the TV.