Problem with CD/DVD drive detection in 4.08

[DaveThornton]

I have been running hoster 4.06 without problems, but i have upgraded to 4.08, now when i start hoster, it says that my cd/dvd drive is bad. I am using a laptop purchased and built by MTU. The drive works fine for microstudio. I don't know how to correct this without going back to 4.06.

ADMIN NOTE: I split this to a new thread so we can track it separately.

[ddouglass]

Originally Posted by DaveThornton

I have been running hoster 4.06 without problems, but i have upgraded to 4.08, now when i start hoster, it says that my cd/dvd drive is bad. I am using a laptop purchased and built by MTU. The drive works fine for microstudio. I don't know how to correct this without going back to 4.06.

Next time please post your problem in a new thread as your problem has nothing to do with the thread's subject problem.
Have you tried clicking on the retest?
If so and it still will not recognize it as good, then close 4.08 and open 3.4
(C:\Program Files\Micro Technology Unlimited\Hoster\Hoster34.exe) and use the CD/DVD default drive tools "Detect Again" button. With this one you have to insert a CDG disk and it will try to read it. If that works then close 3.4 and re-open Hoster 4.08 and your drive should be listed as good.

[Harry Reid]

I am having the same problem and changing back to an older version did not take care of it. 4.08 will not recognize any of my burners including the one purchased from MTU...any other suggestions..

[ddouglass]

Did you try the Hoster 3.4 detect as I listed above?
What drives and what operating system?
Is Windows recognizing them?
What version of Hoster did you upgrade from?

[Harry Reid]

Originally Posted by Harry Reid

I am having the same problem and changing back to an older version did not take care of it. 4.08 will not recognize any of my burners including the one purchased from MTU...any other suggestions..

I upgraded from 4.06a to 4.08 and the new version does not recognize my cd drives. I have an internal cd drive and a external drive that was purchased from MTU. When I switch back to version 3.4 as suggested it will recognize the drives. When I re-open 4.8 it will not.
I am using a Dell laptop with XP operating system 250 GB HD and 250GB Ramm.
As far as I can tell all other features of 4.08 are working fine other than the cd drive issue.
Looking for suggestion to fix the problem

[madjim- with the Lord]

Originally Posted by DaveThornton

I have been running hoster 4.06 without problems, but i have upgraded to 4.08, now when i start hoster, it says that my cd/dvd drive is bad. I am using a laptop purchased and built by MTU. The drive works fine for microstudio. I don't know how to correct this without going back to 4.06.

Dave,
When you see the Select CD/DVD window just hit Cancel and the drive should work, it does for me. If not, unistall 4.08 and install 4.06 then select your drive (in 4.06). Once this is done, reinstall 4.08 over 4.06 and hit the "Cancel" button anytime you see the Select CD/DVD window.

It appears that 4.08 knows that your drive is good, the bug is in the Select CD/DVD window.

I hope this helps.

Jim

[DaveThornton]

thanks for the help. Sorry for not starting a new thread. I started 34 as stated, and my drive worked, but after going back to 4.8, it still says that my drive is bad, but i can now use the drive anyway. Thanks again.

[sleflar]

We also have the same problem on two of our laptops. It seems to be mostly Sound Choice. We went back to 4.06 and the problem went away. All settings were made per MTU request. All of our laptops have 4mgs ram.

[ddouglass]

Originally Posted by sleflar

We also have the same problem on two of our laptops. It seems to be mostly Sound Choice. We went back to 4.06 and the problem went away. All settings were made per MTU request. All of our laptops have 4mgs ram.

Which problem are you talking about? There have been two or three different things discussed in this thread.

[admin]

Folks, MTU has full focus on this problem right now. So far, we can't find why some 4.08 users are not able to recognize a known good drive, while the vast majority are having no problems.

We just had another user call with this same problem. However, the Hoster Demo 4.08 works fine with the drive, but Hoster 4.08 doesn't.

That proves the drive is not at fault. We are now checking to insure our Demo and Full version have the identical code, which is possible they may have different code. If so, that is extremely easy to fix. That is where we are right now, and frankly I hope that is the problem.

I'll keep you informed from this Forum. You will receive ONE Forum notice from this Thread and no more until you visit the Thread again. So if someone else posts after me, you won't get another email notice of my future posts until you visit this Thread again. That's the way things work....

[billyo]

i had that problem when i downloaded the 4.08 demo, i have 3 ext. drive hooked up into my test pc and all the drives tested bad except for one and i tried to import a song on the good drive and and it took forever the progress bar didnt even move, tried it on my laptop, drive tested good but i had the same import problem, i opened microstudio on my test pc and imported some disc on all the drives and it went w/o a hitched, every disc was imported in less than 5 minutes..

[admin]

Originally Posted by billyo

i had that problem when i downloaded the 4.08 demo, i have 3 ext. drive hooked up into my test pc and all the drives tested bad except for one and i tried to import a song on the good drive and and it took forever the progress bar didnt even move, tried it on my laptop, drive tested good but i had the same import problem, i opened microstudio on my test pc and imported some disc on all the drives and it went w/o a hitched, every disc was imported in less than 5 minutes..

What version of Microstudio did you use in this test?