How to hook all this up???

[Rockrz]

So far, here's what I've got for my starter system, and it's all brand new...

Behringer Xenyx 1202FX Mixer
Behringer iNUKE NU3000 2-Channel 3000 Watt Power Amp
DBX DriveRack PA+ Complete Loudspeaker Management System

and I'm running a pair of Behringer Eurolive B212XL Speakers

So, do I connect the DBX DriveRack between the mixer and the amplifier?

[Lonman]

Yep, mixer to Driverack
Driverack to amps
Then obviously speakers from amp.

[Rockrz]

OK, thanks.

Now... how do I tie in the Lexicon device?

Does that connect to my laptop first, and then the mixer plugs in to the Lexicon device?

I'm using the Lexicon Alpha

[Lonman]

Originally Posted by Rockrz

OK, thanks.

Now... how do I tie in the Lexicon device?

Does that connect to my laptop first, and then the mixer plugs in to the Lexicon device?

I'm using the Lexicon Alpha

Computer to Lexi via USB cable. Use either the 1/4" or RCA outputs of the Lexi to the mixers stereo channel - not the RCA 'tape in' plugs. The unfortunate thing with this mixer is lack of eq on the stereo channels, so if you get something that's really bass heavy, or needs the treble adjusted, turn the mids down to blend the singer better, you will not be able to. You may be abe to get an eq software that will allow you to adjust the music eq's from your computer. That is one thing that is lacking in Hoster that should be added.

[Rockrz]

OK, thanks.

Do you know if the Lexicon folks have software to adjust the music eq from my computer?

Maybe something they sell separately that works with the Lexicon Alpha unit?

[Lonman]

you should be able to find something for free. Something like this
http://www.freewarefiles.com/RealTim...ram_24090.html