View Single Post
  #6  
Old June 30th, 2004, 10:18 AM
Rich LePage Rich LePage is offline
Blocked From MTU.Community
 
Join Date: Nov 2000
Location: NYC Area
Posts: 110
I think Geezer is right about M/Sync not working with IRQ5 in most machines. Ideally, you should try to make say Krystal run on IRQ 10 or 11 and Microsync on whichever of those Krystal is NOT using. Krystal and M/Sync both need exclusive use of a sep IRQ for each I am pretty certain, espec with W/95.

I run one Microsync system and several other non-sync ones with Win95OSR2 and with Win98SE and WinME. The M/sync one is not at the site I am right now, but am pretty certain it is running Win98SE, a Pentium 133 with Intel Endeavor M/board which has a couple ISA slots so can use M/Sync.

Does your machine's BIOS allow you to select exclusive use of an IRQ by a PCI slot and/or an ISA slot? That was key in getting M/sync to run with Krystal originally. With the Intel m/board, I had to use a 3rd party BIOS (MR-BIOS) to get it to do that-- the stock Intel BIOS did not offer that feature.

Hope this helps you.
Reply With Quote