Post #1 by Crash66
Quote:
|
One of the 2 problems is actually unrelated to the hoster program in function. The ATI video card that came with the rack computer works great with a computer monitor and regular A/V monitor. However this is a residential project not a professional gig this customer only has a Mitsubishi HDTV with either component or HDMI> I have already tried to convert the VGA over to Component using a Key Digital piece and it does work but of course overscans, and that wont work. So my first question is does anyone no of or is using a HDTV in their application and what video card did you use?
|
I see no one got around to answering YOUR FIRST QUESTION. Somehow, I saw the 1st question, because I started reading from the top first.
Yes, I hook to a 42" HDTV at one location.
1st, I use this:
GrandTec GEZ-1000 VGA to TV Converter
http://www.tigerdirect.com/applicati...791&CatId=1428
Even though I could go RCA OUT to RCA IN, I go RCA OUT of the Converter to RCA IN of an RF MODULATOR. Then, COAX OUT of the RF MODULATOR to COAX IN of the TV and set my RF MODULATOR and the TV to Channel 3.
I used to use an ATI 9600. Now, I use a MATROX P750.
But, since you stated that the HDTV you're needing to hook to doesn't have COAX or RCA, which I find hard to believe, but does have RGB (Component) inputs, I would check out this:
http://shop.ati.com/searchresults.as...ria=151-V01094
or this, if you are not sure that the above adapter will work with a RADEON 9600 Series (this does):
http://www.svideo.com/hdtvaiwr8500.html
In the future, if I were you, I would only ask ONE QUESTION per thread.