|
1. I have a Plextor Plexwriter E-IDE (ATAPI-4) - Internal part #PX-W4012TA/SW
2. Here are the specs for record speed etc...
Data Transfer Rate Z-CLV and CLV write/CAV read
Sustained Read/Write Speeds 17X/40X (CAV read only) 2.6–6.0 MB/sec (Mode 1, XA Mode 2 Form1, and CD-R)
40X (write only) 6.0 MB/sec
32X (write only) 4.8 MB/sec
24X (write only) 3.6 MB/sec (CD-DA, CD-R)
20X (write only) 3.0 MB/sec
16X (write only) 2.4 MB/sec (CD-DA, CD-R)
14X/32X (CAV read only) 2.08–4.8 MB/sec (CD-DA and CD-R)
10X/24X (PCAV read only) 1.56–3.6 MB/sec (CD-RW)
12X (rewrite only) 1.8 MB/sec
10X (rewrite only) 1.5 MB/sec
8X (read/write/rewrite) 1.2 MB/sec (CD-DA, CD-R)
4X (read/write/rewrite) 600 KB/sec (CD-DA, CD-R)
2X (rewrite only) 300 KB/sec
Burst Read/Write 16.6 MB/sec (PIO Mode 4/DMA Mode 2), 33.3 MB/sec (UDMA Mode 2)
Average Random Access 120 ms
Buffer 4 MB
Error Rate CD-ROM Mode 1: block/1012 bits, CD-ROM Mode 2: block/109 bits
Spindle Motor Brushless
3. I have a P4 2 GHZ processor with 640mb of RDRAM
4. I have a 60 gig hard drive 7200
This should give you all the info you need. Please let me know if your software will back up my CD+G's faster than CDRWIN
Thanks
|