|
Crown Prince,
What operating system are you using? Did you make sure that you made the change under the Drives menu as follows, once you updated your ASPI drivers?
NOTE: If you have Microstudio 2.314 (or later versions) then you will have to make the following change in Microstudio, for this to work.
Once you have downloaded and installed the above files do the following:
1) Open Microstudio
2) Go to the Drives Menu
3) Select ASPI Drivers...
4) Change this selection from "Use the MTU installed driver" to "Use the default driver"
5) Close Microstudio and reopen it for this to take affect.
__________________
Bryan, MTU
|