MTU.Community

MTU.Community (http://forum.mtu.com/index.php)
-   Hoster Help (http://forum.mtu.com/forumdisplay.php?f=71)
-   -   Last track will not copy - updated drive firmware and it now works fine (http://forum.mtu.com/showthread.php?t=7113)

allphaseone March 9th, 2006 09:51 PM

Last track will not copy - updated drive firmware and it now works fine
 
I have been following the forum on copying the last track on a multi. I also have that problem. I have the latest of everything, the software, a drive that copies everything , except that last track. My drive reads the disk in every other player I have, except this one. Why. That is why I bought the upgrade. Can someone give me some insight. I have read the manual to see if I am missing something. In this case it really did not help.

djmadmaxx March 10th, 2006 02:15 PM

what is it doing with the last track when you're importing? Does it show that it's not imported? Is it hanging at the end of the import?

A few more details may help

Cap'n Jack March 11th, 2006 02:26 PM

mine is doing the same thing. It hangs near the end of the read cycle

admin March 11th, 2006 05:27 PM

Hoster 3.301 received a MAJOR overhaul to make importing the last track of a Multisession CDG disc as good as it can get. If you don't have 3.301, get it.

From the manual: "Hoster can import the last track from most Multisession format CDG discs. There are some discs where the last track has been mastered wrong, and we cannot correct that."

A technique that users evolved is to eject the disc while importing the last track when the progress bar appears to "hang" and not show further progress. The song will be on the hard drive, with some silence at the end.

However, the 3.301 changes, to our current knowledge, overcame most of the need to eject the disc.

Please post the Disc Brand and DiscID number so we know what you are struggling with.

allphaseone March 12th, 2006 11:33 AM

response to last track not copying
 
The disk I am copying are the "all Hits brands" and "backstage". I have other brands ,I stopped when I noticed the below problem.
when I read the above disk in a normal audio program like Musicmatch or windows media, all audio filkes show and everything plays fine. When I put it in your program , import from cd, everything shows but last song to import. It is not even listed. It will import everything else and it all works great. Just can not get the last song to display to import, can not get that song.
With that said, I have tried this over and over and have the same problem. No listing for the last song. however, I put a "Radio Starz" disk in this morning and it picked up and showed and copied every song. I then went back and put ing several of the "all hits " and backstage disks and it still will not pick up the last song. Any suggestions. I need these songs.

mikedomi March 12th, 2006 12:29 PM

admin all hits and backstage
 
the disc they are talking about are not proteced

the disc should go right in .the last track on the disc are just like the 14 other tracks before it .


admin i am not saying its hoster but i know its not the disc
they are saying that hoster is not even seeing the last track

i took a look at these disc plextor drives take them right in

mindonstrike March 12th, 2006 06:51 PM

Something to try
 
This has worked in similiar situations in the past.

Try inserting the disk in the cdrom before opening hoster. If by some chance that should work, your drive should continue to see all the tracks at least untill you change brands.

Sam

a2kmike March 13th, 2006 10:12 AM

Quote:

Originally Posted by a2kmike
I have had a problem like this before and it was the drive not being able to read the CDG...I had to turn on the "Use Software Decoding"
function in CD/DVD Drive Defaults in the Tools Menu...and it solved the problem. The drive is a Plextor PX-740 which I understand is made for Plextor by Benq which would make it essentialy not a Plextor drive.


After some thought on this I actually had to use another drive. A Plextor PXW-5224 to read the CDG's, the Plextor 740 would not read all the tracks on the discs. So never mind .....hey been up all nite and half the morning so...ya know the mind gets kinda foggy without much rest. Like some have suggested before in other threads in this forum, you may try making a copy and trying to load it.

MTUSUPPORT March 13th, 2006 03:31 PM

Every time that I have seen this problem is has been related to the drive itself.

If anyone else has this problem, please let me know the exact model of the drive that you are trying to use.

allphaseone March 13th, 2006 10:25 PM

last track still not showing
 
Thanks for all of the replies. I have tried all of your suggestions to get the last track to show up. Still no luck. I have tried everything. Only thing I have not done is buy another drive. I have tried it on 3 different ones, same result. Does not really make any sense. I need to get more suggestions, I reallyt need to get these songs. It ends up being thousands of songs. Some of them popular with singers. Any other suggestions. Program works great except for this problem.

admin March 14th, 2006 10:59 AM

Facts... facts...facts... please!

allphaseone, you still have not given us at least ONE DiscID-Brand that does not show the last track. Without the DiscID number, we can't help much further.

Also, post the exact brand and model number of the CDR/DVDR drive you are using.

Also,post the exact Hoster version you are using. Click the Help menu, About Hoster command to see this. Post it here.

There are too many variables here to identify what is going wrong. We need to know the three answers above.

allphaseone March 14th, 2006 05:12 PM

response to last track not copying
 
In a previous message I actually mentioned that all of the "All Hits" series disk and "Backstage" series disk are what I tried and all of them do not show the last song to copy. However, when I put in a Radio Starz disk, in the same burner, it works fine. It showed all 18 songs. The burner I use is a LITE-ON dvdrw ldw 851s external. I have tried it however with other burners and it does the same thing.

I am using 3.301 which I just downloaded. Let me know what else you need.

mikedomi March 14th, 2006 05:31 PM

admin
 
this is what i was telling you i have all of the all hits disc (after reading this post i went and look at about 30 of them no protec on them)
and i can tell you for a fact none of them have any type of protection on them

if you remember all hits has allways given us a hard way to go

when i was testing we had found a few problems that were related to all hits

but i have no problem importing them into hoster

but i am using a plextor cdg drive i am not using your software decoding

could this be waer the problem is just thinking out load

the only reason i say that is the plextor drives i use have no problem with allhits disc . with no problem good luck mike
plextor
24/10 40a
12/4/32
48/24/48u
all these drives are importing the all hits and backstage disc

a2kmike March 14th, 2006 05:48 PM

Quote:

Originally Posted by admin
Facts... facts...facts... please!

allphaseone, you still have not given us at least ONE DiscID-Brand that does not show the last track. Without the DiscID number, we can't help much further.

Also, post the exact brand and model number of the CDR/DVDR drive you are using.

Also,post the exact Hoster version you are using. Click the Help menu, About Hoster command to see this. Post it here.

There are too many variables here to identify what is going wrong. We need to know the three answers above.


allphaseone

admin needs the specific discs #'s that are causing you problems and the specific brand and model #'s on the drives u are using without the exact info the are shooting blindly at quail like Dick Cheney.

allphaseone March 14th, 2006 06:39 PM

last track still not showing
 
tHE DISKS ARE THE ALL HITS DISK NUMBERS AHVP02 THROUGH AHVP10. aLSO ANY OTHER ALL HITS DISK APPLY. ALL "BACKSTAGE " DISKS THATR YOU HAVE LISTED IN YOUR PROGRAM ALSO APPLY. I INCLUDED THE MODEL NUMBER OF MY DISK DRIVE IN MY PREVIOUS RESPONSE EARLIER TODAY.

MTUSUPPORT March 15th, 2006 10:08 AM

Here is another Thread Speaking of this type of issue. http://forum.mtu.com/showthread.php?...highlight=3400

Read Post: #11 by MTUSUPPORT

Quote:

I got 2 of these discs in Yesterday. The ones that I have are SC3400 and SC3314, they are multisession and they show all 16 tracks on both Discs using the following drives:

Plextor PX-716AL Firmware Version: 1.02
Plextor PX-740A Firmware Version 1.01 NOTE:This drive does not normally work correctly for Multisession discs, but with these it is working fine.
Plextor PX-716A Firmware Version: 1.09
Pioneer DVR-K05 Firmware Version : 1.03(Laptop drive)

They show all 16 tracks on both of the discs on all the listed drives above, so this must be a hardware related problem.

Try updating your Firmware for your Plextor drives from:http://www.plextor.com/english/suppo...oads.html#firm Select the model of your Plextor drive, and download and update to the latest firmware.

MTUSUPPORT March 17th, 2006 10:17 AM

I would say on your system the problem is the Liteon Drive. Those are OEM cheap drives, and don't have all the bells and whistles as Plextor does.

To make your life easier, get a Plextor PX-716A drive. It works perfect.

We sell this drive at: http://www.mtu.com/basics/karaokecdr.htm

allphaseone March 18th, 2006 12:00 PM

last track will not show
 
I updated the firmware for the drive from the manufactures sight and now everything is fine. Good call. Thanks.


All times are GMT -4. The time now is 06:27 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2009 - 2025, Jelsoft Enterprises Ltd.
The contents of this forum are copyrighted by Micro Technology Unlimited, 2000-2008. Use of any material from these Forums is prohibited without written agreement from MTU.