MTU.Community

MTU.Community (http://forum.mtu.com/index.php)
-   Hoster Help (http://forum.mtu.com/forumdisplay.php?f=71)
-   -   don't recognize plextor drive (http://forum.mtu.com/showthread.php?t=6038)

arpaco July 16th, 2005 03:38 PM
don't recognize plextor drive
 
well i am very unhappy with the new 3.11 upgrade...been nothing but problems, biggest one being now since i upgraded, it doesn't recognize my plextor external CD-RW, i did everything the forum thread about this said, but still nothing works, any help would be mucho appreciado

billyo July 18th, 2005 08:35 AM
that happened to me too..what i did was ..i went to tools...aspi drives and clicked on mtu installed drive.see if that works

lmcmains July 18th, 2005 08:39 AM
Same thing happened to me this weekend. Since I upgraded to 3.110 Hoster or Micro Studio doesn't even see my plextor drive. The Plextor works ok on other programs. Just not with Hoster and Micro Studio. My Plextor is an internal 712a. I have never had any problems with it before I done the upgrade.

arpaco July 18th, 2005 10:04 AM
plextor problem
 
:m brain,
is there any way i can get rid of the upgrade and go to the old program everthing was working find before the upgrade please answer soon i'm a working karaoke host
thank you arpaco

George July 18th, 2005 02:08 PM
See if this helps:

http://www.mtu.com/kb/index.php?page...2&id=23&c=root

George

lmcmains July 18th, 2005 03:55 PM
Quote:
Originally Posted by George

George
I tried all of that and Hoster or Micro Studio still doesn't see my Plextor drive. This all happened on the upgrade. I havn't changed any thing else.
:?

MTUSUPPORT July 18th, 2005 04:09 PM
The upgrade should never have caused this to happen. The problem seems to have been with the Motherboard drivers that allow the system see the drive, using the ASPI drivers. So what I would suggest is going to your Motherboard Manufacturers website and then get the very latest drivers for your Chipset, or Motherboard drivers. Then once you have done this, you need to run the Hoster Upgrade again selecting Upgrade to reinstall the latest version of the ASPI driver. It should then be working.

lmcmains July 18th, 2005 05:52 PM
:) I re-installed Hoster, Everything works fine now.

Thanks

arpaco July 22nd, 2005 10:30 AM
Quote:
Originally Posted by MTUSUPPORT
The upgrade should never have caused this to happen. The problem seems to have been with the Motherboard drivers that allow the system see the drive, using the ASPI drivers. So what I would suggest is going to your Motherboard Manufacturers website and then get the very latest drivers for your Chipset, or Motherboard drivers. Then once you have done this, you need to run the Hoster Upgrade again selecting Upgrade to reinstall the latest version of the ASPI driver. It should then be working.
Ok..its not the motherboard, it IS the upgrade, because the system sees the drive, Hoster doesn't..so it is not the board, just to be sure i upgraded the drivers for it and did what you said, and it doesn't work.. my other computer still has 3.006 on it and it works fine, so it it your upgrade, like i said, send me a refund and a link to download the older version. If you can't make the upgrade work on my computer, i shouldn't have to pay for it, so refund my money

Beavis July 23rd, 2005 07:34 AM
are you starting any other programs before hoster ??


All times are GMT -4. The time now is 07:58 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2009 - 2025, Jelsoft Enterprises Ltd.
The contents of this forum are copyrighted by Micro Technology Unlimited, 2000-2008. Use of any material from these Forums is prohibited without written agreement from MTU.