![]() |
Echo/Reverb
Is there a software solution to adding echo to the microphone input, assuming I'm using a laptop? If not, is there a small, portable unit available with two mic inputs, volume and echo control? I am trying to travel with the minimum equipment.
|
Re: Echo/Reverb
Don't know of any Software Controlled Effects, other than with your Sound Card, but you are not hooking your Microphones to your Sound Card...I hope.
So here are some hardware suggestions: If you use a Powered Mixer, you can either replace the Powered Mixer with one that has BUILT-IN Effects or obtain an EFFECTS PROCESSOR (about $100 - $300) and connect it to your Mixers Effects OUT and Effects RETURN, assuming you have an Effects OUT and Effects RETURN on your Powered Mixer. If you are using a separate Mixer with a separate AMP, you can either replace the Mixer with one that has BUILT-IN Effects or obtain an EFFECTS PROCESSOR and hook it up as stated in the above paragraph. Be aware that, unless your Mixer has an Effects STEREO OUT, even though most Effects Processors have Stereo IN/OUT's, you will not be able to utilize Stereo. I use a Yamaha Emx5000 Powered Mixer (about $750.00), for small shows. It has TWO Effects Channels Built-In with TWO 500W Amplifiers/Channel@ 4ohms, Stereo. Plenty of Power and I do not have to keep switching between Effects to accommodate a Song Genre or Singing Style. One Effects Channel is set on Echo and the other Effects Channel is set on Reverb. To smooth most Singer's voices I use Both Effects, at the same time. It is hard to know how to advise because there are many unknowns, other than monetary, concerning your application. Hope this provides a ray of hope, Norm |
Re: Echo/Reverb
MTU should look at that possibility?
There is in fact a Karaoke software that uses a very good sound engine and it does have the option of adding some reverb on the selected input like Line if your Mic is connected to a mixer. Another excellent option is to use the EAX software that comes with most Sound Blaster product, believe me it does an excellent job & it could perform better than some external device. :? The best option would be for Hoster to offer this reverb plug in so this way you don't depend on any other device!! :g |
Re: Echo/Reverb
a computer only has limited capabilities for good sound from the mic. I suggest the mackie dfx12 mixer at about $265.00. it has the built in effects, and is a small package. It has separate pic preamps, for each channel.
after investing in a great system like the hoster I'm sure you will want to also have great sound. that is what keeps the people knocking on your door. |
Re: Echo/Reverb
Quote by gduns:
a computer only has limited capabilities for good sound from the mic. I have to disagree with this comment! In a studio recording the effects for the mics comes from the plugins included in a pro software. A computer could give you better results than some external device, it's just a question of knowing what to use & how to calibrate. First, a mic should always be connected to a Mixer that has a mic preamp built in and of course with an XLR connection. Never use the mic in from the audio card but the line in!! The EAX Audio HQ (Sound Blaster) could give you better results than any Vocopro digital echo device! :w |
Re: Echo/Reverb
APPLES TO ORANGES........
He is talking using a laptop, and you are talking Quote:
|
Re: Echo/Reverb
I have mixed feeling on this one. Effects plug in's utilized through the program would be an awsome feature for Hoster, the snag would be, how to apply it to just the mic'd singer and not the entire track. That is why these things are best left to external processors. However, down the road, with the support of some other I/O device, where hoster could designate what is going to happen on what channel, then we'd have something. What do you say support, any thoughts about doing anything like this in the future? :r :)
|
Re: Echo/Reverb
Quote:
Sometimes we skew prior requests to make room for a really hot new feature or necessary upgrade, such as fixing the PHM problem. :r |
All times are GMT -4. The time now is 01:37 PM. |
Powered by vBulletin® Version 3.7.1
Copyright ©2009 - 2025, Jelsoft Enterprises Ltd.
The contents of this forum are copyrighted by Micro Technology Unlimited, 2000-2008. Use of any material from these Forums is prohibited without written agreement from MTU.