MTU.Community

MTU.Community (http://forum.mtu.com/index.php)
-   CD-Recorders and Media Open Forum (http://forum.mtu.com/forumdisplay.php?f=15)
-   -   Unable to Write CD Using MicroStudio w/LITEON (http://forum.mtu.com/showthread.php?t=11997)

GwenButler March 4th, 2010 11:13 PM

Unable to Write CD Using MicroStudio w/LITEON
 
Have imported songs to my computer successfully as they do play successfully when MicroStudio play option is used--graphics appear just fine.

When attempting to use "WriteCD" option I get error message:

"Error: Destination device not ready".

Devices in on, w/usb cable to computer in tact. I've installed Nero8 Essentials software. I downloaded and installed MicroStudio software when I purchased external CD recorder. Is there anything additional included on CDG Karaoke CD I received with recorder or is it just a bakup for downloaded software?:?

Thanks in advance.

ddouglass March 4th, 2010 11:41 PM

Re: Unable to Write CD Using MicroStudio w/LITEON
 
Go to Start/Programs/Startup and right click on Nero shortcut in there. Delete it. It is not necessary for Nero to work and it also will lock-up in CD Drive for exclusive use of write function.

GwenButler March 5th, 2010 01:40 AM

Re: Unable to Write CD Using MicroStudio w/LITEON
 
Thanks again, DDouglass!!! Did as you suggested. Deleted shortcut access from "Start" prompt, even used "RegCure" software to delete Nero"filter entry" from startup procedure. No change at all.

Still getting message:
"Error: Destination device not ready".
When attempting to use "WriteCD" option.



Thanks for taking time out to help somone who despartely needs Help!!!!


ddouglass March 5th, 2010 01:48 AM

Re: Unable to Write CD Using MicroStudio w/LITEON
 
Did you reboot after clearing out Nero? If not do so as the changes won't be effective until you do.
Check and make sure the drive is in the Tools/Default Drives and has the correct drive letter. If you plugged in the drive after turning on the computer it may have changed drive letters in which case MS won't recognize it.

GwenButler March 5th, 2010 01:56 AM

Re: Unable to Write CD Using MicroStudio w/LITEON
 
Thanks DDouglass! Yes I did re-boot, twice. And I did have computer on when I connected the CD recorder (bummer). I am not sure of how to check for proper drive specification. What is the path?

GB

ddouglass March 5th, 2010 02:03 AM

Re: Unable to Write CD Using MicroStudio w/LITEON
 
Microstudio - Tools Default Drive.
What operating system?
Laptop or Desktop?
Version of Microstudio?

GwenButler March 5th, 2010 02:09 AM

Re: Unable to Write CD Using MicroStudio w/LITEON
 
What operating system? WindowsXP Home
Laptop or Desktop? Desktop
Version of Microstudio? 4.22

Thanks!
<!-- / message --><!-- sig -->

GwenButler March 5th, 2010 02:15 AM

Re: Unable to Write CD Using MicroStudio w/LITEON
 
Dale,
You are absolutley right. My drive specifications are all screwed up.

GB

ddouglass March 5th, 2010 02:19 AM

Re: Unable to Write CD Using MicroStudio w/LITEON
 
Try going to Control Panel, click on System, go to Hardware tab, then click on Device Manager.
Find the drive and uninstall it.
Then reboot.
If this doesn't fix it then you may have a bad cable or drive controller (inside drive and not replaceable).

GwenButler March 5th, 2010 03:18 AM

Re: Unable to Write CD Using MicroStudio w/LITEON
 
Thanks Dale! Once again I am good to go!!!


Best Regards,
The Karaoke Queen!!


All times are GMT -4. The time now is 07:59 AM.

Powered by vBulletin® Version 3.7.1
Copyright ©2009 - 2019, Jelsoft Enterprises Ltd.
The contents of this forum are copyrighted by Micro Technology Unlimited, 2000-2008. Use of any material from these Forums is prohibited without written agreement from MTU.