MTU.Community

MTU.Community (http://forum.mtu.com/index.php)
-   Microstudio Help (http://forum.mtu.com/forumdisplay.php?f=6)
-   -   microstudio 4.000 cuts a few seconds off before song is finished (http://forum.mtu.com/showthread.php?t=9120)

james18249 July 25th, 2007 01:50 PM

microstudio 4.000 cuts a few seconds off before song is finished
 
I'm using windows xp pro with all the latest upgrades. when I record a cd-g disc using microstudio 4 it cuts off the end of the song by a few seconds when I play it back on my karaoke machine. I seen someone else has the same problem is there something I'm doing wrong??? I've try adding the extra time between tracks but it didn't matter, it still cut off the end. Also, the original cd-g disc plays just fine. I'm using the plextor px-716al burner. any help would be greatly appreciated as none of the cd-g's I burned are any good. Thanks
Jim :m

Ron Green August 10th, 2007 08:54 AM

I too have this problem. I was wondering if I used a 74 minute CD and posted it as 80 minute CD. When I put in all of my songs it said I ha 4 minutes left. I may delete a song and see if that works. Let me kmow if this problem gets solved.

ddouglass August 10th, 2007 09:48 AM

James,
I am not sure how this went un-noticed by MTU or the rest of us.
When you say you have the latest upgrades from Microsoft, is this through the auto-update or have you gone to the update web and done the "Custom" updates?
Also have you gone to Plextor's website and updated the firmware for your PX-716?


Ron,
Are you saying that you did this or if it would work? If it is a 74 minute CD then set the program to 74 min so it can calculate your time correctly. If it said you have 4 minutes left then yes it will run out of room (80 - 74 = 6 meaning you ran over by 2 minutes). And this isn't the same problem as James since his is cutting off the end of each song, not the end of the disc.

Ron Green August 10th, 2007 10:33 AM

Thank's for the instant reply. I haven't tried it yet. I just discovered it last night. The CD's are the printable CD's from Fry's and I didn't have the label that says what time is available on them. I am not getting 100% yield with these CD's but when they work they are OK. I run them through an Epson 220 CD printer then spray with a clear lacquar from Home Depot. Then they look "STORE BOUGHT".

George August 10th, 2007 10:56 AM

Quote:

Originally Posted by ddouglass (Post 64743)
Ron,
Are you saying that you did this or if it would work? If it is a 74 minute CD then set the program to 74 min so it can calculate your time correctly. If it said you have 4 minutes left then yes it will run out of room (80 - 74 = 6 meaning you ran over by 2 minutes). And this isn't the same problem as James since his is cutting off the end of each song, not the end of the disc.

That is not correct..

The DISC MEDIA setting has no effect on what is actually written. If you have it set wrong as compared to the media you are actually using, if the setting is less than the media, a warning will tell you that the media does not contain enough room, based on your input. This is strictly a warning as the program assumes you have that setting correct.

However, if you set the DISC MEDIA at 18 minutes, but in fact have inserted an 80 minute disc, and want to write 78 minutes, the program will NOT stop writing at 18 minutes, and you will get the full 78 minutes.

George August 10th, 2007 12:01 PM

I may have mis-read Dale's answer, and we both said the same thing in a different way.:s

ddouglass August 10th, 2007 12:16 PM

Quote:

Originally Posted by Ron Green (Post 64745)
Thank's for the instant reply. I haven't tried it yet. I just discovered it last night. The CD's are the printable CD's from Fry's and I didn't have the label that says what time is available on them. I am not getting 100% yield with these CD's but when they work they are OK. I run them through an Epson 220 CD printer then spray with a clear lacquar from Home Depot. Then they look "STORE BOUGHT".

Be careful that it doesn't look exactly like the original or someone may think you are counterfeitting (sp) them.:g :w

Ron Green August 10th, 2007 12:41 PM

Nah, I design my own with my wife's favorite colors and big print so she can read the title's with glasses. No way do they look anything like the original.

jahern August 15th, 2007 06:55 PM

Cutting Off The Song By A Few Seconds.
 
james18249 I'm using windows xp pro with all the latest upgrades. when I record a cd-g disc using microstudio 4 it cuts off the end of the song by a few seconds when I play it back on my karaoke machine.

I think people are assuming that you mean cutting off the recording time on your disc, but it sounds like you are saying that each song is somehow affected when you play it in your karaoke machine, not your computer.

I had a reverse problem in versions earlier than 4.001, possibly 4.000. My karaoke machine would play the whole song, but if the music pushed up too close to the end of the graphics in the song, the music would be cut off a few seconds when I played it with my computer using Microstudio That problem was finally fixed the last time I checked. (Haven't checked 4.002:e )

You said playing it back on your karaoke machine. I don't know what to make of that except that perhaps it has to do with the two second gap in-between tracks. I think that Microstudio might not allow those two second gaps and some songs might be cutting it close (Music ending very close to the end of the track), Your particular karaoke machine might not take too kindly to that (I assume your originals play OK)

It's very similar to the problem I complained about for years, but it isn't the same thing. (According to how I interpret your description)


All times are GMT -4. The time now is 12:14 PM.

Powered by vBulletin® Version 3.7.1
Copyright ©2009 - 2024, Jelsoft Enterprises Ltd.
The contents of this forum are copyrighted by Micro Technology Unlimited, 2000-2008. Use of any material from these Forums is prohibited without written agreement from MTU.