Plextor 716A supported by Microstudio 2.610 or Hoster 3.006 and higher
 

Will this drive read & write CD+G

Re: Plextor 716A
 

Most likely this drive will work, but we don't yet have drivers for this drive.

We should have the drivers for this drive in the next release of Microstudio.

Re: Plextor 716A- Thanks for the info
 

Thanks for the info Bryan. I hate it could posibly be march before i can get the driver, Hopefuly it will come today. Thanks again for the reply.

Re: Plextor 716A- NOT YET SUPPORTED by MTU in 2.609
 

Wonderful, I just bought a Plextor 716A today, and just purchased this program to go with it. I havn't been able to even open up the program after installed. says it is an invalid path.

Re: Plextor 716A- NOT YET SUPPORTED by MTU in 2.609
 

I too just upgraded to Hoster3.06 that supports the 716A. I needed micostudio to fully utilize Hoster, so I just bought Microstudio2.609. Help Guys!!!!!

Willy :e

Re: Plextor 716A- NOT YET SUPPORTED by MTU in 2.609
 

Microstudio 2.610 will support this when it is released. This will probably be released 2/15/05. We have not yet updated Microstudio to support this drive, but it will be in the next few weeks.

Re: Plextor 716A- NOT YET SUPPORTED by MTU in 2.609
 

Thanks Bryan,
I'm looking forward to it. I have been using the MTU products for a couple of years and have had a lot of fun and success. I am just getting Hoster set up on my new computer and have a lot of multisession disks. Hoster is an excellent tool and I look forward to using it at shows! Have a lot of hours of importing before that though. :g

Willy

Re: Plextor 716A- NOT YET SUPPORTED by MTU in 2.609
 

I too am waiting for support for my Plextor 716A. How will we know when this upgrade is available?

Re: Plextor 716A- ONLY SUPPORTED by MTU in 2.610 or Hoster 3.006
 

Click on your Personal Download Link. 2.610 supports this drive and was out on 2-04-05. Here is the Page that will tell you when Items are released http://www.mtu.com/support/news.htm

Re: Plextor 716A- ONLY SUPPORTED by MTU in 2.610 or Hoster 3.006
 

. I have down load the new update program for the plaxtor 716A and the burner still is not working This is the second time I have purchased this program and it still is not working Ned help

Re: Plextor 716A- ONLY SUPPORTED by MTU in 2.610 or Hoster 3.006
 

I purchased the MTU Microsudio 2.610 and once installed my Plextor 716A drive was able to read, rip from and record Karaoke CD+G

Re: Plextor 716A- ONLY SUPPORTED by MTU in 2.610 or Hoster 3.006
 

Sometimes, for unknown reasons (thanks Microsoft! :r), in the Reading or Writing Drive fields, even if your drive is visible, it may not be "selected". Go figure... :r

Click the drop down arrows for each of these fields and reselect your drive.

Re: Plextor 716A- ONLY SUPPORTED by MTU in 2.610 or Hoster 3.006
 

I downloaded the upgrade and it works GREAT with my 716UF drive! Thanks MTU! :)

Plextor 716a Driver
 

I am a seasoned MTU Plextor and Microstudio user. Love their products. I recently purchased a Plextor 716A burner. Works wonderfully for backing up all my Karaoke cd's. I am trying to get the DVD software that came with the burner to download, but it will not enter. Any help out there. I use a Windows XP Home. (File attached). Thanks, Patti

Patricia,
I have emailed you on this, to give Plextor a call as they are the ones that support the DVD software. MTU only supports our Microstudio software, not software that comes with your Plextor drive.

Plextor 716a
 

Thanks Brian,
I will contact Plextor.
Patti

Error 2:0:0 not 3:0:0 ?
 

I recently purchased (from you) the 716A and the upgrade to 2.612
I can copy but not burn.. I get an error:
"START DAO RECORDING" command failed on device 2:0:0
Disc type not supported

I don't have Roxio & I Uninstalled Nero 6.. to no avail..

JohnD, I believe you problem is the medium (disc) you are trying to use. Either the disc is bad (cheap ones tend to have more failures per pack) or the type you are using isn't supported. RW type definately won't work and I don't believe Microstudio will copy to a DVD either.

Thanks for the input ddouglas.. I'm using a CD-R .. I'll try another brand tomorrow. I've been using my brand successfully for 4 yrs.. but I guess the "upgrade" could be that "picky"? Something's gottagive.. I'm deffinately not happy with my purchase so far. Two other programs that I used to use don't recognise the 716A as a CD+G either.

That definately is not so.

I use CDRW's for every project I do using KHP and Microstudio so I can see what the finished material is actually going to look like when played on the big screen t.v.. When I get it how I want it then I burn to a regular CDR, erase the CDRW, and use it over.

Also use CDRW to save work that changes, such as back-up files, etc. Saves a lot of coasters.

As with any other media, I use the best grade CDRW's available, and have no trouble with quality of CDG burns.

Only drawbacks are write speed limitation, and CDG player compatability. My Sony players are CDRW compatible, as is Microstudio.

George